SS7 for the
Common Man
Last modified: Thu, 30 Nov 2006 15:29:09 GMT
 |  |  |  |  |  |  |  |  |  |  |  | Home  Documentation Manuals strisdn Manual |
| ||
| ||
| ||
| ||
| ||
strisdn Manual
Description: OpenSS7 Online Manuals
A PDF version of this document is available here.
OpenSS7 STREAMS ISDN
OpenSS7 STREAMS ISDN Installation and Reference Manual
About This Manual
This is Edition 4, last updated 2008-10-31, of The OpenSS7 STREAMS ISDN Installation and Reference Manual, for Version 0.9.2 release 4 of the OpenSS7 STREAMS ISDN package.
Preface
Notice
This package is released and distributed under the GNU Affero General Public License (see AGPL). Please note, however, that there are different licensing terms for the manual pages and some of the documentation (derived from OpenGroup1 publications and other sources). Consult the permission notices contained in the documentation for more information.
This manual is released under the FDL (see GNU Free Documentation License) with no sections invariant.
Abstract
This manual provides a Installation and Reference Manual for OpenSS7 STREAMS ISDN.
Objective
The objective of this manual is to provide a guide for the STREAMS programmer when developing STREAMS modules, drivers and application programs for OpenSS7 STREAMS ISDN.
This guide provides information to developers on the use of the STREAMS mechanism at user and kernel levels.
STREAMS was incorporated in UNIX System V Release 3 to augment the character input/output (I/O) mechanism and to support development of communication services.
STREAMS provides developers with integral functions, a set of utility routines, and facilities that expedite software design and implementation.
Intent
The intent of this manual is to act as an introductory guide to the STREAMS programmer. It
is intended to be read alone and is not intended to replace or supplement the
OpenSS7 STREAMS ISDN manual pages. For a reference for writing code, the manual pages
(see STREAMS(9)) provide a better reference to the programmer.
Although this describes the features of the OpenSS7 STREAMS ISDN package,
OpenSS7 Corporation is under no obligation to provide any software,
system or feature listed herein.
Audience
This manual is intended for a highly technical audience. The reader should already be familiar with Linux kernel programming, the Linux file system, character devices, driver input and output, interrupts, software interrupt handling, scheduling, process contexts, multiprocessor locks, etc.
The guide is intended for network and systems programmers, who use the STREAMS mechanism at user and kernel levels for Linux and UNIX system communication services.
Readers of the guide are expected to possess prior knowledge of the Linux and UNIX system, programming, networking, and data communication.
Revisions
Take care that you are working with a current version of this manual: you will not be notified of updates. To ensure that you are working with a current version, contact the Author, or check The OpenSS7 Project website for a current version.
A current version of this manual is normally distributed with the OpenSS7 STREAMS ISDN package.
Version Control
strisdn.texi,v
Revision 0.9.2.9 2008-09-20 11:04:36 brian
- added package patchlevel
Revision 0.9.2.8 2008-08-03 06:03:37 brian
- protected agains texinfo commands in log entries
Revision 0.9.2.7 2008/07/27 08:49:27 brian
- no invariant sections, more libtool ignores
Revision 0.9.2.6 2008-04-29 00:48:58 brian
- updated headers for release
Revision 0.9.2.5 2008-04-25 11:50:51 brian
- updates to AGPLv3
Revision 0.9.2.4 2007/08/12 06:44:43 brian
- updated licenses in manuals
Revision 0.9.2.3 2007/06/22 00:18:53 brian
- mostly documentation updates for release, some netconfig workaround
Revision 0.9.2.2 2007/02/28 06:31:16 brian
- updates and corrections, #ifdef instead of #if
Revision 0.9.2.1 2006/10/16 10:48:52 brian
- added new package files
ISO 9000 Compliance
Only the TeX, texinfo, or roff source for this manual is controlled. An opaque (printed, postscript or portable document format) version of this manual is an UNCONTROLLED VERSION.
Disclaimer
OpenSS7 Corporation disclaims all warranties with regard to this documentation including all implied warranties of merchantability, fitness for a particular purpose, non-infringement, or title; that the contents of the manual are suitable for any purpose, or that the implementation of such contents will not infringe on any third party patents, copyrights, trademarks or other rights. In no event shall OpenSS7 Corporation be liable for any direct, indirect, special or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with any use of this manual or the performance or implementation of the contents thereof.
OpenSS7 Corporation reserves the right to revise this software and documentation for any reason, including but not limited to, conformity with standards promulgated by various agencies, utilization of advances in the state of the technical arts, or the reflection of changes in the design of any techniques, or procedures embodied, described, or referred to herein. OpenSS7 Corporation is under no obligation to provide any feature listed herein.
U.S. Government Restricted Rights
If you are licensing this Software on behalf of the U.S. Government ("Government"), the following provisions apply to you. If the Software is supplied by the Department of Defense ("DoD"), it is classified as "Commercial Computer Software" under paragraph 252.227-7014 of the DoD Supplement to the Federal Acquisition Regulations ("DFARS") (or any successor regulations) and the Government is acquiring only the license rights granted herein (the license rights customarily provided to non-Government users). If the Software is supplied to any unit or agency of the Government other than DoD, it is classified as "Restricted Computer Software" and the Government's rights in the Software are defined in paragraph 52.227-19 of the Federal Acquisition Regulations ("FAR") (or any successor regulations) or, in the cases of NASA, in paragraph 18.52.227-86 of the NASA Supplement to the FAR (or any successor regulations).
Acknowledgements
As with most open source projects, this project would not have been possible without the valiant efforts and productive software of the Free Software Foundation and the Linux Kernel Community.
Sponsors
Funding for completion of the OpenSS7 OpenSS7 STREAMS ISDN package was provided in part by:
| • OpenSS7 Corporation
|
Additional funding for The OpenSS7 Project was provided by:
Contributors
The primary contributor to the OpenSS7 OpenSS7 STREAMS ISDN package is Brian F. G. Bidulock. The following is a list of significant contributors to The OpenSS7 Project:
| − Per Berquist
| |
| − John Boyd
| |
| − Chuck Winters
| |
| − Peter Courtney
| |
| − Tom Chandler
| |
| − Gurol Ackman
| |
| − Kutluk Testicioglu
| |
| − John Wenker
| |
| − Others
|
Authors
The authors of the OpenSS7 OpenSS7 STREAMS ISDN package include:
| − Brian Bidulock
|
See Author Index, for a complete listing and cross-index of authors to sections of this manual.
Maintainer
The maintainer of the OpenSS7 OpenSS7 STREAMS ISDN package is:
| − Brian Bidulock
|
Please send bug reports to bugs@openss7.org using the send-pr script included in the package, only after reading the BUGS file in the release, or See Problem Reports.
Web Resources
The OpenSS7 Project provides a website dedicated to the software packages released by the OpenSS7 Project.
Bug Reports
Please send bug reports to bugs@openss7.org using the send-pr script included in the OpenSS7 STREAMS ISDN package, only after reading the BUGS file in the release, or See Problem Reports. You can access the OpenSS7 GNATS database directly via the web, however, the preferred method for sending new bug reports is via mail with the send-pr script.
Mailing Lists
The OpenSS7 Project provides a number of general discussion Mailing Lists for discussion concerning the OpenSS7 OpenSS7 STREAMS ISDN package as well as other packages released by The OpenSS7 Project.
These are mailman mailing lists and so have convenient web interfaces for subscribers to control their settings. See http://www.openss7.org/mailinglist.html.
The mailing lists are as follows:
- openss7
- The openss7 mailing list is for general enquiries, information exchange and announcements
regarding the OpenSS7 Project. This is our original mailing list
and takes the highest amount of traffic.
- openss7-announce
- The openss7-announce mailing list is for announcements related to the
OpenSS7 Project. This list will accept announcements posted by
subscribers. Subscribe to this list if you are interested in announcements from the
OpenSS7 Project, subscribers and sponsors, related to the
OpenSS7 Project or STREAMS, SS7, SIGTRAN or SCTP in general.
- openss7-cvs
- The openss7-cvs mailing list is for automatic CVS log reporting. You must get permission of
the owner to subscribe to this list. Subscribers are not allowed to post to this list, this is
merely for distributing notification of changes to the CVS repository.h
- openss7-develop
- The openss7-develop mailing list is for email exchange related to the development projects
under the OpenSS7 Project. This includes development requests,
proposals, requests for comment or proposal. Subscribe to this list if you are interested in
ongoing development details regarding the OpenSS7 Project.
- openss7-test
- The openss7-test mailing list is for email exchange related to the testing of code under the
OpenSS7 Project. This specifically relates to conformance testing,
verification testing, interoperability testing and beta testing. Subscribe to this list if you are
interested in participating in and receiving ongoing details of test activities under the
OpenSS7 Project.
- openss7-bugs
- The openss7-bugs mailing list is specifically tailored to bug tracking. The mailing list
takes a feed from the OpenSS7 GNATS bug tracking
system and accepts posting of responses to bug reports, tracking and resolution. Subscribe to this
list if you are interested in receiving detailed OpenSS7 release code bug tracking
information. This list is not archived; for historical information on problem reports, see our
GNATS databases.
- openss7-updates
- The openss7-updates mailing list provides updates on OpenSS7 Project code releases and ongoing activities. Subscribers are not allowed to post to this list;
this list is for official OpenSS7 Project announcements only.
Subscribe to this list if you are interested in receiving updates concerning official releases and
activities of the OpenSS7 Project.
- openss7-streams
- The openss7-streams mailing list is for email exchange related to the STREAMS
development projects under the OpenSS7 Project. This includes
development requests, proposals, requests for comment or proposal. Subscribe to this list if you
are interested in ongoing development details regarding the OpenSS7 Project STREAMS components.
- linux-streams
- The linux-streams mailing list is for mail exchange related to Linux Fast-STREAMS or
Linux STREAMS. This includes patches, development requests, proposals, requests for comment
or proposal. Subscribe to this list if you are interested in ongoing development details regarding
the STREAMS for Linux components. This is the the new (September 2006) home of the
linux-streams list formerly of <
gsyc.escet.urjc.es>.
Spam
To avoid spam being sent to the members of the OpenSS7 mailing list(s), we have blocked mail from non-subscribers. Please subscribe to the mailing list before attempting to post to them. (Attempts to post when not subscribed get bounced.)
As an additional measure against spam, subscriber lists for all OpenSS7 mailing lists are not accessible to non-subscribers; for most lists subscriber lists are only accessible to the list administrator. This keeps your mailing address from being picked off our website by bulk mailers.
Acceptable Use Policy
It is acceptable to post professional and courteous messages regarding the OpenSS7 package or any general information or questions concerning STREAMS, SS7, SIGTRAN, SCTP or telecommunications applications in general.
Large Attachments
The mailing list is blocked from messages of greater than 40k. If you have attachments
(patches, test programs, etc.) and you mail them to the list, it will bounce to the list
administrator. If you are interested in making your patches, test programs, test results or other
large attachments available to the members of the mailing list, state in the message that you would
like them posted and the list administrator will place them in the mail archives.
Quick Start Guide
OpenSS7 STREAMS ISDN
Package strisdn-0.9.2.4 was released under AGPLv3 2008-10-31.
OpenSS7 STREAMS ISDN (strisdn) is an OpenSS7 Project implementation of a number of ISDN related components, including Q.920, Q.921, Q.931, GR-303, V5.2, DPNSS/DASS. The package includes kernel modules, SVR 4.2 STREAMS drivers, modules, libraries, utilities, test programs, daemons, and development environment for the development and execution of OpenSS7 STREAMS ISDN applications for the SVR 4.2 STREAMS environment.
This release is the first separate release of the OpenSS7 STREAMS ISDN package. Some of the components in this package were formerly present in the strss7 package. Various networking drivers are provided as well as CDI, DLPI, NPI, TPI and CCI header files for ISDN operation. The package contains the necessary manual pages and other documentation for ISDN components in a separate autoconf tarball.
The OpenSS7 STREAMS ISDN package includes kernel modules, SVR 4.2 STREAMS drivers, modules, libraries, utilities, test programs, daemons, and development environment for the development and execution of OpenSS7 STREAMS ISDN applications for the SVR 4.2 STREAMS environment.
This package is currently incomplete. It is being released as a reference point for the community. If you are interested in completion of this package, sponsor the OpenSS7 Project. To sponsor the project, contact info@openss7.com.
This distribution is only currently applicable to Linux 2.4 and 2.6 kernels and was targeted
at ix86, x86_64, ppc and ppc64 architectures, but should build and
install for other architectures as well.
Release
This is the strisdn-0.9.2.4 package, released 2008-10-31. This ‘0.9.2.4’ release, and the latest version, can be obtained from the download area of The OpenSS7 Project website using a command such as:
$> wget http://www.openss7.org/tarballs/strisdn-0.9.2.4.tar.bz2
The release is available as an autoconf(1) tarball, src.rpm or dsc, as a set of binary rpms or debs, or as a yum(8) or apt(8) repository. See the download page for the autoconf(1) tarballs, src.rpms, dscs, or repository access instructions. See the strisdn package page for tarballs, source and binary packages.
Please see the NEWS file for release notes and history of user visible changes for the current version, and the ChangeLog file for a more detailed history of implementation changes. The TODO file lists features not yet implemented and other outstanding items.
Please see the INSTALL, INSTALL-strisdn and README-make, files (or see Installation) for installation instructions.
When working from cvs(1) or git(1), please see the README-cvs, file (or see Downloading from CVS). An abbreviated installation procedure that works for most applications appears below.
This release of the package is published strictly under Version 3 of the GNU Affero Public License which can be found in the file COPYING. Package specific licensing terms (if any) can be found in the file LICENSES. Please respect these licensing arrangements. If you are interested in different licensing terms, please contact the copyright holder, or OpenSS7 Corporation <sales@openss7.com>.
See README-alpha (if it exists) for alpha release information.
Prerequisites
The quickest and easiest way to ensure that all prerequisites are met is to download and install this package from within the OpenSS7 Master Package, openss7-0.9.2.G, instead of separately.
Prerequisites for the OpenSS7 STREAMS ISDN package are as follows:
- Linux distribution, somewhat Linux Standards Base compliant, with a 2.4 or 2.6 kernel
and the appropriate tool chain for compiling out-of-tree kernel modules. Most recent Linux
distributions are usable out of the box, but some development packages must be installed. For more
information, see Compatibility.
− A fairly LSB compliant GNU/Linux distribution.2 − Linux 2.4 kernel (2.4.10 - 2.4.27), or − Linux 2.6 kernel (2.6.3 - 2.6.26); − glibc2 or better. − GNU groff (for man pages).3 − GNU texinfo (for info files). − GNU bison and flex (for config programs). − net-snmp (for SNMP agents).4
(Note: If you acquired strisdn a part of the OpenSS7 Master Package, then the dependencies listed below will already have been met by unpacking the master package.)
- OpenSS7 Linux Fast-STREAMS, streams-0.9.2.4. 5
- OpenSS7 STREAMS Compatibility Modules, strcompat-0.9.2.7.
- OpenSS7 STREAMS XNS, strxns-0.9.2.7.
- OpenSS7 STREAMS XTI/TLI, strxnet-0.9.2.12.
- OpenSS7 STREAM Network Services Library, strnsl-0.9.2.4. (Optional.)
- OpenSS7 STREAMS Sockets, strsock-0.9.2.4. (Optional.)
- OpenSS7 STREAMS INET, strinet-0.9.2.7.
- OpenSS7 STREAMS SCTP, strsctp-0.9.2.9.
- OpenSS7 STREAMS Channels, strchan-0.9.2.4.
- OpenSS7 STREAMS X.25, strx25-0.9.2.1.
- OpenSS7 STREAMS ISO, striso-0.9.2.4.
When configuring and building multiple OpenSS7 Project release packages, place all of the source packages (unpacked tarballs) at the same directory level and all build directories at the same directory level (e.g. all source packages under /usr/src).
When installing packages that install as kernel modules, it is necessary to have the correct kernel development package installed. For the following distributions, use the following commands:
Ubuntu: $> apt-get install linux-headers
Debian: $> apt-get install kernel-headers
Fedora: $> yum install kernel-devel
You also need the same version of gcc(1) compiler with which the kernel was built. If it is not the default, add ‘CC=kgcc’ on the line after ‘./configure’, for example:
$> ../strisdn-0.9.2.4/configure CC='gcc-3.4'
Installation
The following commands will download, configure, build, check, install, validate, uninstall and remove the package:
$> wget http://www.openss7.org/tarballs/strisdn-0.9.2.4.tar.bz2
$> tar -xjvf strisdn-0.9.2.4.tar.bz2
$> mkdir build
$> pushd build
$> ../strisdn-0.9.2.4/configure --enable-autotest
$> make
$> make check
$> sudo make install
$> sudo make installcheck
$> sudo make uninstall
$> popd
$> sudo rm -rf build
$> rm -rf strisdn-0.9.2.4
$> rm -f strisdn-0.9.2.4.tar.bz2
If you have problems, try building with the logging targets instead. If the make of a logging target fails, an automatic problem report will be generated that can be mailed to The OpenSS7 Project.6 Installation steps using the logging targets proceed as follows:
$> wget http://www.openss7.org/tarballs/strisdn-0.9.2.4.tar.bz2
$> tar -xjvf strisdn-0.9.2.4.tar.bz2
$> mkdir build
$> pushd build
$> ../strisdn-0.9.2.4/configure --enable-autotest
$> make compile.log
$> make check.log
$> sudo make install.log
$> sudo make installcheck.log
$> sudo make uninstall.log
$> popd
$> sudo rm -rf build
$> rm -rf strisdn-0.9.2.4
$> rm -f strisdn-0.9.2.4.tar.bz2
See README-make for additional specialized make targets.
For custom applications, see the INSTALL and INSTALL-strisdn files or the see Installation, as listed below. If you encounter troubles, see Troubleshooting, before issuing a bug report.
Brief Installation Instructions
The OpenSS7 STREAMS ISDN package is available from the downloads area of The OpenSS7 Project website using a command such as:
$> wget http://www.openss7.org/tarballs/strisdn-0.9.2.4.tar.bz2
Unpack the tarball using a command such as:
$> tar -xjvf strisdn-0.9.2.4.tar.bz2
The tarball will unpack into the relative subdirectory named after the package name: strisdn-0.9.2.4.
The package builds using the GNU autoconf utilities and the configure script. To build the package, we recommend using a separate build directory as follows:
$> mkdir build
$> cd build
$> ../strisdn-0.9.2.4/configure
In general, the package configures and builds without adding any special options to the configure script. For general options to the configure script, see the GNU INSTALL file in the distribution:
$> less ../strisdn-0.9.2.4/INSTALL
For specific options to the configure script, see the INSTALL-strisdn file in the distribution, or simply execute the configure script with the --help option like so:
$> ../strisdn-0.9.2.4/configure --help
After configuring the package, the package can be compiled simply by issuing the ‘make’ command:
$> make
Some specialized makefile targets exists, see the README-make file in the distribution or simply invoke the ‘help’ target like so:
$> make help | less
After successfully building the package, the package can be checked by invoking the ‘check’ make target like so:
$> make check
After successfully checking the package, the package can be installed by invoking the ‘install’ make target (as root) like so:
$> sudo make install
The test suites that ship with the package can be invoked after the package has been installed by invoking the ‘installcheck’ target. This target can either be invoked as root, or as a normal user, like so:
$> make installcheck
(Note: you must add the --enable-autotest flag to configure, above for the test suites to be invoked with ‘make installcheck’.)
The package can be cleanly removed by invoking the ‘uninstall’ target (as root):
$> sudo make uninstall
Then the build directory and tarball can be simply removed:
$> cd ..
$> rm -rf build
$> rm -rf strisdn-0.9.2.4
$> rm -f strisdn-0.9.2.4.tar.bz2
Detailed Installation Instructions
More detailed installation instructions can be found in the Installation, contained in the distribution in ‘text’, ‘info’, ‘html’ and ‘pdf’ formats:
$> cd ../strisdn-0.9.2.4
$> less doc/manual/strisdn.txt
$> lynx doc/manual/strisdn.html
$> info doc/manual/strisdn.info
$> xpdf doc/manual/strisdn.pdf
The ‘text’ version of the manual is always available in the MANUAL file in the release.
The current manual is also always available online from The OpenSS7 Project website at:
$> lynx http://www.openss7.org/strisdn_manual.html
1 Introduction
This manual documents the design, implementation, installation, operation and future development schedule of the OpenSS7 STREAMS ISDN package.
1.1 Overview
This manual documents the design, implementation, installation, operation and future development of the OpenSS7 STREAMS ISDN package.
1.2 Organization of this Manual
This manual is organized (loosely) into several sections as follows:
| Introduction. | This introduction
|
| Objective. | Objective of the package
|
| Reference. | Contents of the package
|
| Conformance. | Conformance of the package
|
| Releases. | Releases of the package
|
| Installation. | Installation of the package
|
| Troubleshooting. | Troubleshooting of the package
|
1.3 Conventions and Definitions
This manual uses texinfo typographic conventions.
2 Objective
3 Reference
3.1 Files
STRISDN creates the following kernel modules files in the kernel modules directory, /lib/modules/2.4.20-28.7/:7
- modules.strisdn
STRISDN installs the following kernel module files in the kernel modules directory, /lib/modules/2.4.20-28.7/strisdn/:8
STRISDN installs the following header files in the system include directory, /usr/include/strisdn/:
- sys/strisdn/config.h
- sys/strisdn/version.h
- sys/capi.h
- sys/capi_ioctl.h
- sys/cci.h
- sys/dlpi_gr303.h
- sys/dlpi_isdn.h
- sys/dlpi_lapd.h
- sys/dlpi_v52.h
- sys/dua_ioctl.h
- sys/gr303_ioctl.h
- sys/isdni.h
- sys/isdni_ioctl.h
- sys/lapd_ioctl.h
- sys/lapf_ioctl.h
- sys/ph.h
- sys/q920.h
- sys/v52_ioctl.h
- sys/strisdn/version.h
STRISDN installs the following test programs in the system libexec directory, /usr/libexec/strisdn/:9
- send-pr
- send-pr.config
- The send-pr stand-alone shell script can be used for the automatic generation of problem
reports for the OpenSS7 STREAMS ISDN package. The send-pr.config file provides
localized definitions used by the send-pr program.
For more information on problem reports, See Problem Reports, and, in particular, See Stand Alone Problem Reports.
- test-isdn
- test case executable.
- testsuite
- atlocal
- The testsuite stand-alone shell script invokes test cases in the test programs above as compiled into a comprehensive regression, troubleshooting and validation test suite for the OpenSS7 STREAMS ISDN drivers. The atlocal file provides localized definitions used by the testsuite program. For more information on test suites, See Test Suites, and, in particular, See Running Test Suites.
STRISDN installs the following utility programs in the system binary directory, /usr/sbin/:
- strisdn_mknod
- This utility can be used by init scripts or administrative users to create or remove device nodes in the /dev directory for OpenSS7 STREAMS ISDN drivers.
STRISDN installs the following init scripts in the system init directory, /etc/rc.d/init.d/ (non-Debian) or /etc/init.d/ (Debian):
- strisdn
- This is the name of the system init script on non-Debian based systems.
- strisdn.sh
- This is the name of the system init script on Debian based systems.
STRISDN installs the following system configuration files in the configuration directory, /etc/:
- strisdn.conf
- This file provided configuration information for any system controls affected by the
‘strisdn’ package.
- modutils/strisdn
- This file provides module definitions and demand loading aliases for the strisdn package. This file is really only applicable to older 2.4 kernels.
STRISDN installs the following system configuration file in the system configuration directory, /etc/sysconfig/ (non-Debian) or /etc/default/ (Debian):
- strisdn
- This file provides system configuration information used by init scripts for the ‘strisdn’ package. Some options of init script execution can be controlled by this file.
STRISDN installs the following info files in the system info directory, /usr/share/info/:
- strisdn.info
- strisdn.info-1
- These files contain this manual in GNU info format.
STRISDN installs the following manual page macros and reference database files in the system man directory, /usr/share/man/:10
- strisdn.macros
- This file contains manual page macro definitions included by the manual pages included in the
package.
- strisdn.refs
- This file contains a reference database referenced by the manual pages included in the package.
STRISDN installs the following manual pages in the system man directory, /usr/share/man/man4/:
- capi.4
- capi_ioctl.4
- dass.4
- dl_gr303.4
- dl_lapd.4
- dl_lapf.4
- dl_v52.4
- dpnss.4
- gr303.4
- gr303_ioctl.4
- idlc.4
- idp.4
- ISDN.4
- isdn.4
- isdn_undoc.4
- lapd.4
- lapf.4
- q921.4
- q922.4
- q931.4
- v52.4
- v5.4
- v5_ioctl.4
- capi_ioctl.4
STRISDN installs the following manual pages in the system man directory, /usr/share/man/man5/:
- strisdn.5
- manual page for the strisdn(5) package.
STRISDN installs the following manual pages in the system man directory, /usr/share/man/man7/:
- capi.7
- CC_ADDR_ACK.7
- CC_addr_ack.7
- CC_addr_ack_t.7
- CC_ADDR_REQ.7
- CC_addr_req.7
- CC_addr_req_t.7
- CC_ALERTING_IND.7
- CC_alerting_ind.7
- CC_alerting_ind_t.7
- CC_ALERTING_REQ.7
- CC_alerting_req.7
- CC_alerting_req_t.7
- CC_BIND_ACK.7
- CC_bind_ack.7
- CC_bind_ack_t.7
- CC_BIND_REQ.7
- CC_bind_req.7
- CC_bind_req_t.7
- CC_BLOCKING_CON.7
- CC_blocking_con.7
- CC_blocking_con_t.7
- CC_BLOCKING_IND.7
- CC_blocking_ind.7
- CC_blocking_ind_t.7
- CC_BLOCKING_REQ.7
- CC_blocking_req.7
- CC_blocking_req_t.7
- CC_BLOCKING_RES.7
- CC_blocking_res.7
- CC_blocking_res_t.7
- CC_CALL_FAILURE_IND.7
- CC_call_failure_ind.7
- CC_call_failure_ind_t.7
- CC_CALL_REATTEMPT_IND.7
- CC_call_reattempt_ind.7
- CC_call_reattempt_ind_t.7
- CC_CONNECT_IND.7
- CC_connect_ind.7
- CC_connect_ind_t.7
- CC_CONNECT_REQ.7
- CC_connect_req.7
- CC_connect_req_t.7
- CC_CONT_CHECK_IND.7
- CC_cont_check_ind.7
- CC_cont_check_ind_t.7
- CC_CONT_CHECK_REQ.7
- CC_cont_check_req.7
- CC_cont_check_req_t.7
- CC_CONT_REPORT_IND.7
- CC_cont_report_ind.7
- CC_cont_report_ind_t.7
- CC_CONT_REPORT_REQ.7
- CC_cont_report_req.7
- CC_cont_report_req_t.7
- CC_CONT_TEST_IND.7
- CC_cont_test_ind.7
- CC_cont_test_ind_t.7
- CC_CONT_TEST_REQ.7
- CC_cont_test_req.7
- CC_cont_test_req_t.7
- CC_DATALINK_FAILURE_IND.7
- CC_datalink_failure_ind.7
- CC_datalink_failure_ind_t.7
- CC_DISCONNECT_IND.7
- CC_disconnect_ind.7
- CC_disconnect_ind_t.7
- CC_DISCONNECT_REQ.7
- CC_disconnect_req.7
- CC_disconnect_req_t.7
- CC_ERROR_ACK.7
- CC_error_ack.7
- CC_error_ack_t.7
- CC_ERROR_IND.7
- CC_error_ind.7
- CC_error_ind_t.7
- CC_FACILITY_IND.7
- CC_facility_ind.7
- CC_FACILITY_REQ.7
- CC_facility_req.7
- CC_FORWXFER_IND.7
- CC_forwxfer_ind.7
- CC_forwxfer_ind_t.7
- CC_FORWXFER_REQ.7
- CC_forwxfer_req.7
- CC_forwxfer_req_t.7
- CC_HOLD_CON.7
- CC_hold_con.7
- CC_HOLD_IND.7
- CC_hold_ind.7
- CC_HOLD_REQ.7
- CC_hold_req.7
- CC_HOLD_RES.7
- CC_hold_res.7
- cci.7
- CC_IBI_IND.7
- CC_ibi_ind.7
- CC_ibi_ind_t.7
- CC_IBI_REQ.7
- CC_ibi_req.7
- CC_ibi_req_t.7
- cci_capi.7
- cci_dass.7
- cci_gr303.7
- cci_idlc.7
- cci_isdn.7
- CC_INFO_ACK.7
- CC_info_ack.7
- CC_info_ack_t.7
- CC_INFO_REQ.7
- CC_info_req.7
- CC_info_req_t.7
- CC_INFORMATION_IND.7
- CC_information_ind.7
- CC_information_ind_t.7
- CC_INFORMATION_REQ.7
- CC_information_req.7
- CC_information_req_t.7
- CC_INFO_TIMEOUT_IND.7
- CC_info_timeout_ind.7
- CC_info_timeout_ind_t.7
- CC_MAINT_IND.7
- CC_maint_ind.7
- CC_maint_ind_t.7
- CC_MORE_INFO_IND.7
- CC_more_info_ind.7
- CC_more_info_ind_t.7
- CC_MORE_INFO_REQ.7
- CC_more_info_req.7
- CC_more_info_req_t.7
- CC_NOTIFY_IND.7
- CC_notify_ind.7
- CC_notify_ind_t.7
- CC_NOTIFY_REQ.7
- CC_notify_req.7
- CC_notify_req_t.7
- CC_OK_ACK.7
- CC_ok_ack.7
- CC_ok_ack_t.7
- CC_OPTMGMT_ACK.7
- CC_optmgmt_ack.7
- CC_optmgmt_ack_t.7
- CC_OPTMGMT_REQ.7
- CC_optmgmt_req.7
- CC_optmgmt_req_t.7
- CC_PROCEEDING_IND.7
- CC_proceeding_ind.7
- CC_proceeding_ind_t.7
- CC_PROCEEDING_REQ.7
- CC_proceeding_req.7
- CC_proceeding_req_t.7
- CC_PROGRESS_IND.7
- CC_QUERY_CON.7
- CC_progress_ind.7
- CC_progress_ind_t.7
- CC_PROGRESS_REQ.7
- CC_progress_req.7
- CC_progress_req_t.7
- CC_query_con.7
- CC_query_con_t.7
- CC_QUERY_IND.7
- CC_query_ind.7
- CC_query_ind_t.7
- CC_QUERY_REQ.7
- CC_query_req.7
- CC_query_req_t.7
- CC_QUERY_RES.7
- CC_query_res.7
- CC_query_res_t.7
- CC_REGISTER_IND.7
- CC_register_ind.7
- CC_REGISTER_REQ.7
- CC_register_req.7
- CC_REJECT_IND.7
- CC_reject_ind.7
- CC_reject_ind_t.7
- CC_REJECT_REQ.7
- CC_reject_req.7
- CC_reject_req_t.7
- CC_RELEASE_CON.7
- CC_release_con.7
- CC_release_con_t.7
- CC_RELEASE_IND.7
- CC_release_ind.7
- CC_release_ind_t.7
- CC_RELEASE_REQ.7
- CC_release_req.7
- CC_release_req_t.7
- CC_RELEASE_RES.7
- CC_release_res.7
- CC_release_res_t.7
- CC_RESET_CON.7
- CC_reset_con.7
- CC_reset_con_t.7
- CC_RESET_IND.7
- CC_reset_ind.7
- CC_reset_ind_t.7
- CC_RESET_REQ.7
- CC_reset_req.7
- CC_reset_req_t.7
- CC_RESET_RES.7
- CC_reset_res.7
- CC_reset_res_t.7
- CC_RESTART_CON.7
- CC_restart_con.7
- CC_restart_con_t.7
- CC_RESTART_REQ.7
- CC_restart_req.7
- CC_restart_req_t.7
- CC_RESUME_CON.7
- CC_resume_con.7
- CC_resume_con_t.7
- CC_RESUME_IND.7
- CC_resume_ind.7
- CC_resume_ind_t.7
- CC_RESUME_REJECT_IND.7
- CC_resume_reject_ind.7
- CC_resume_reject_ind_t.7
- CC_RESUME_REJECT_REQ.7
- CC_resume_reject_req.7
- CC_resume_reject_req_t.7
- CC_RESUME_REQ.7
- CC_resume_req.7
- CC_resume_req_t.7
- CC_RESUME_RES.7
- CC_resume_res.7
- CC_resume_res_t.7
- CC_RETRIEVE_CON.7
- CC_retrieve_con.7
- CC_RETRIEVE_IND.7
- CC_retrieve_ind.7
- CC_RETRIEVE_REQ.7
- CC_retrieve_req.7
- CC_RETRIEVE_RES.7
- CC_retrieve_res.7
- CC_SETUP_COMPLETE_IND.7
- CC_setup_complete_ind.7
- CC_setup_complete_ind_t.7
- CC_SETUP_COMPLETE_REQ.7
- CC_setup_complete_req.7
- CC_setup_complete_req_t.7
- CC_SETUP_CON.7
- CC_setup_con.7
- CC_setup_con_t.7
- CC_SETUP_IND.7
- CC_setup_ind.7
- CC_ADDR_ACK.7