OpenSS7
SS7 for the
Common Man
© Copyright 1997-2007 OpenSS7 Corporation All Rights Reserved.
Last modified: Sun, 05 Mar 2006 08:34:15 GMT
Home Top Index FirstPrev Next LastMore Download Info FAQ Mail  Home -> Documentation -> Conformance -> SS7 Stack -> MTP Level 3 -> ETSI MTP3 PICS
Quick Links

Download

SCTP

SIGTRAN

SS7

Hardware

STREAMS

Asterisk

Related

Package

Manual

Status

FAQ

MTP Level 3

ETSI MTP3 PICS

SS7 Stack

ISUP

BSSAP

TCAP

SCCP

MTP Level 3

SS7 Stack Manager

Conformance

Applications

SS7 Stack

ISDN Stack

SIGTRAN Stack

VoIP Stack

MG Stack

SS7/ISDN Devices

IP Transport

Embedded Systems

Operating System

Documentation

FAQ

SIGTRAN

Design

Conformance

Performance

References

Man Pages

Manuals

Papers

Home

Overview

Status

Documentation

Resources

About

News

ETSI ETS 300 008-2 Annex A

Description: OpenSS7 SS7 ETSI MTP PICS Proforma.

Annex A (normative): PICS proforma for ETS 300 008-1

Notwithstanding the provisions of the copyright clause related to the text of this ETS, ETSI grands that users of this ETS may freely reproduce the PICS proforma in this annex so that it can be used for its intended purposes and may further publish the completed PICS. 

A.1  Guidance for completing the PICS proforma

A.1.1  Purpose and structure

The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirement define in ETS 300 008-1 [1] may provide information about the implementation in a standardized manner. 

The PICS proforma is subdivided into subclauses for the following categories of information: 

  • guidance for completing the PICS proforma;
  • identification of the implementation;
  • identification of the ETS;
  • global statement of conformance;
  • capabilities.

A.1.2  Abbreviations and conventions

The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 [4]. 

Item column

The item column contains a number which identifies the item in the table. 

Item description column

The item description column describes in free text each respective item (e.g., parameters, timers, etc.). It implicitly means "is <item description> supported by the implementation?". 

Status column

The following notations, defined in ISO/IEC 9646-7 [4], are used for the status column: 

m mandatory - the capability is required to be supported
o optional - the capability may be supported or not
n/a not applicable - in the given context, it is impossible to use the capability
x prohibited (excluded) - there is a requirement not to use this capability in the given context
i out of scope ("i" stands for irrelevant) - this capability is outside the scope of the given base standard and hence irrelevant and not subject to conformance testing. No answer is requested from the supplier
o.i qualified optional - for mutually exclusive or selectable options from a set. "i" is an integer which identifies a unique group of related optional items and the logic of their selection which is defined immediately following the table
ci conditional - the requirement on the capability ("m", "o", "x" or "n/a") depends on the support of other optional or conditional items. "i" is an integer identifying an unique conditional status expression which is defined immediately following the table
Reference column

The reference column make reference to ETS 300 008-1 [1], except where explicitly stated otherwise. 

Support column

The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 [4], are used for the support column: 

Y or y supported by the implementation
N or n not supported by the implementation
N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status)

If this PICS proforma is completed in order to describe a multiple-profile support in a system, it is necessary to be able to answer that a capability is supported for one profile and not supported for another. In that case, the supplier shall enter the unique reference to a conditional expression, preceded by "?" (e.g. ?3). This expression shall be given in the space for comments provided at the bottom of the table. It uses predicates defined in the SCS, each of which refers to a single profile and which takes the value TRUE if and only if that profile is to be used. 

    EXAMPLE:  ?3: IF prof1 THEN Y ELSE N

It is also possible to provide a comment to an answer in the space provided at the bottom of the table. 

NOTE: As state in ISO/IEC 9646-7 [4], support for a received PDU requires the ability to parse all valid parameters of that PDU. Supporting a PDU while having no ability to parse a valid paramter is non-conformant. Support for a parameter on a PDU means that the semanitics of that parameter are supported. Unless specifically convered by a table listing PDU parameters and giving details regarding their status, all parameters of a PDU are required to be fully supported on sending. Support of a PDU therefore implies full support of all required PDU parameters. 

Values allowed column

The values allowed column contains the type, the list, the range, or the length of values allowed. The following notations are used: 

- range of values: <min value> .. <max value>
example: 5 .. 20
- list of values: <value1>, <value2>, ......., <valueN>
example: 2, 4, 6, 8, 9
example: `1101'B, `1011'B, `1111'B
example: `0A'H, `34'H, `2F'H
- list of named values: <name1>(<val1>), <name2>(<val2>), ......., <nameN>(<valN>)
example: reject(1), accept(2)
- length: size(<min size> .. <max size>)
example: size(1 .. 8)
Values supported column

The values supported column shall be filed in by the supplier of the implementation. In this column, the values or the ranges of values supported by the implementation shall be indicated. 

Reference to items

For each possible item answer (answer in the support column) within the PICS proforma a unique reference exists, used, for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character "/", followed by the item number in the table. If there is more than one support column in a table, the columns are discriminated by letters (a, b, etc.), respectively. 

EXAMPLE 1: A.5/4 is the reference to the answer of item 4 in table 5 of annex A.
EXAMPLE 2: A.6/3b is the reference to the second answer (i.e. in the second support column) of item 3 in table 6 of annex A.

A.1.3  Instructions for completing the PIC proforma

The supplier of the implementation shall complete the PICS proforma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support or supported column boxes provided, using the notation described in subclause A.1.2. 

If necessary, the supplier may provide additional comments in space at the bottom of the tables, or separately on sheets of paper. 

More detailed instructions are given at the beginning of the different subclauses of the PICS proforma. 

A.2  Identification of the Implementation

Identification of the Implementation Under Test (IUT) and the system in which it resides (the System Under Test)) should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. 

The product supplier information and client information should both be filled in if they are different. 

A person who can answer queries regarding information supplied in the PICS should be named as the contact person. 

A.2.1  Date of the statement

Date:  

September 1, 2002

A.2.2  Implementation Under Test (IUT) identification

IUT name:  

OpenSS7
IUT version:   0.8.4 Release

A.2.3  System Under Test (SUT) identification

SUT name:  

OpenSS7 Stack
Hardware configuration:   E400P-SS7
Operating system:   Linux 2.4.18

A.2.4  Product supplier

Name:  

OpenSS7 Corporation
Address:   1469 Jeffreys Crescent, Edmonton AB Canada T6L 6T1
Telephone number:   +1-780-490-1141
Facsimile number:   +1-780-490-1241
E-mail address:   openss7@openss7.org
Additional information:    

A.2.5  Client (if different from product supplier)

Name:  

Intermedia AG
Address:    
Telephone number:    
Facsimile number:    
E-mail address:    
Additional information:    

A.2.6  ICS contact person

(A person to contact if there are any queries concerning the content of the PICS) 

Name:  

Brian Bidulock
Address:   1469 Jeffreys Crescent, Edmonton AB Canada T6L 6T1
Telephone number:   +1-780-490-1141
Facsimile number:   +1-780-490-1241
E-mail address:   openss7@openss7.org
Additional information:    

A.3  Identification of the protocol

This PICS proforma applies to the following standard: 

ETS 300 008-1 (1996): "Integrated Services Digital Network (ISDN); Signalling System No. 7; Message Transfer Part (MTP) to support international interconnection; Part 1: Protocol specification [ITU-T Recommendations Q.701 (1993), Q.702 (1988), Q.703 to Q.706 (1993), Q.707 (1988) and Q.708 (1993), modified]". 

A.4  Global statement of conformace

Are all mandatory capabilities implemented? (Yes/No): Yes 

NOTE: Anwering "No" to this question indicates non-conformance to the protocol specification. Non-supported mandatory capabilities are to be identified in the PICS, with an explanation of why the implementation is non-conforming, on pages attached to the PICS proforma.

A.5  Capabilities

This clause contains the core of the PICS proforma for the MTP protocol, as specified in ITU-T Recommendations or ETS 300 008-1 [1] where this modifies the equivalent ITU-T Recommendations, for both MTP level 2 and MTP level 3. The proforma are presented in the form of tables. Subclauses A.5.1 to A.5.10 contain the individual clauses of the PICS proforma. 

A.5.1  Major capabilities - MTP level 2

The supplier of the implementation shall state whether or not the (signalling) procedures for the MTP level 2 as specified in ITU-T Recommendation Q.703 as modified by ETS 300 008-1 [1] are supported, in the tables below. 

Table A.1: Signal unit delimitation
Item Procedure Reference Status Support
1/0a Additional flags (sending) Q.703 - 3.1 o Y
1/0b Additional flags (receiving) Q.703 - 3.1 m Y
1/1 Zero insertion and deletion Q.703 - 3.2 m Y

Comments: 

Table A.2: Acceptance procedure
Item Procedure Reference Status Support
2/1 Acceptance of alignment Q.703 - 4.1 m Y
2/2 Error detection Q.703 - 4.2 m Y

Comments: 

Table A.3: Basic error correction method
Item Procedure Reference Status Support
3/1 Signal Unit Sequence Control Q.703 - 5.2.2 c031 Y
3/2 Positive acknowledgement Q.703 - 5.2.3 c032 Y
3/3 Negative acknowledgement Q.703 - 5.2.4 c032 Y
3/4 Response to Acknowledgement Q.703 - 5.3.1 c032 Y
3/5 Repetition of Message Signal Units Q.703 - 5.3.3 x Y(note 1)

c031: IF A.4/1 THEN o ELSE m
c032: IF A.3/1 THEN m ELSE x 

Comments: 

Note 1: Repetition of MSUs is not provided even as a national option. 

Table A.4: Error correction by preventative cyclic retransmission
Item Procedure Reference Status Support
4/1 Signal unit sequence control Q.703 - 6.2.2 c041 Y
4/2 Positive acknowledgement Q.703 - 6.2.3 c042 Y
4/3 Preventative cyclic retransmission Q.703 - 6.3 c042 Y
4/4 Forced retransmission Q.703 - 6.4 c042 Y

c041: IF A.3/1 THEN o ELSE m
c042: IF A.4/1 THEN m ELSE x 

Comments: 

Table A.5: Initial alignment procedure
Item Procedure Reference Status Support
5/1 Initial alignment procedure Q.703 - 7.3 m Y
5/2 Proving periods Q.703 - 7.4 m Y

Comments: 

Table A.6: level 2 flow control
Item Procedure Reference Status Support
6/1 Detection of congestion Q.703 - 9.2 m Y(note 1)
6/2 Procedure in congestion situation Q.703 - 9.3 m Y
6/3 Congestion abatement procedure Q.703 - 9.4 m Y(note 1)

Comments: 

Note 1: 

Detection of receive congestion is implementation dependent. The OpenSS7 stack provides for detection of receive congestion. This is performed by tracking the backlogged rececived SUs which are awaiting processing or delivery to MTP Level 3. Three threshold values: rb_accept, rb_discrd and rb_abate determine the level (in number of SUs backlogged) that will trigger receive congestion and abatement. 

This function does not check RB (Receive Buffer) occupancy, but rather checks the number of backlogged SUs between the hardware and the SS7 MTP Level 2 and Level 3 state machines. 

Table A.7: Signalling link error monitoring
Item Procedure Reference Status Support
7/1 Signalling unit error rate monitor Q.703 - 10.2 m Y
7/2 Alignment error rate monitor Q.703 - 10.3 m Y

Comments: 

Table A.8: Processor outage
Item Procedure Reference Status Support
8/1 Remote processor outage beginning Q.703 - 8 m Y
8/2 Remote processor outage end Q.703 - 8 m Y
8/3 Local processor outage beginning Q.703 - 8 o (note) N(note 1)
8/4 Local processor outage end Q.703 - 8 c081 N(note 1)
NOTE: This option is implementation dependent.

c081: IF A.8/3 THEN m ELSE n/a 

Comments: 

Note 1: Local processor outage is not detected. This is because the SS7 Level 2 state machines are running on the same processor as the SS7 Level 3 state machines. Should this change (e.g. Level 2 state machines are run on the interface card) 8/3 and 8/4 may be supported in a later release. Mechanisms have been provided to send and receive LPO primitives. 

Local processor outage procedures have been implemented in the SS7 Level 2 state machines; however, there is currently no mechanism for detecting a local processor outage as described above. For the purposes of conformance testing, it is possible to simulate a local processor outage condition. 

A.5.2  Major capabilities - MTP level 3

The supplier of the implementation shall state whether or not the (signalling) procedures for the MTP level 3 as specified in ITU-T Recommendations Q.701 and Q.704 as modified by ETS 300 008-1 [1] are supported, in the tables below: 

Table A.9: Signalling message handling
Item Procedure Reference Status Support
9/1 Message routing function Q.704 - 2.3 m Y
9/2 Message discrimination function Q.704 - 2.4.1 m Y
9/3 STP functionality Q.704 - 2.4.1 o Y
9/4 Message distribution function Q.704 - 2.4.2 m Y
9/5 Quasi-associated mode of signalling Q.704 - 3.1.2 o Y

Comments: 

Table A.10: Signalling network management
Item Procedure Reference Status Support
10/1 Signalling link failure Q.704 - 3.3.1 m Y
10/2 Signalling link restoration Q.704 - 3.3.2 m Y
10/3 Signalling link deactivation Q.704 - 3.3.3 m Y
10/4 Signalling link activation Q.704 - 3.3.4 m Y
10/5 Signalling link blocking Q.704 - 3.3.5 m Y
10/6 Signalling link unblocking Q.704 - 3.3.6 m Y
10/7 Signalling link inhibiting Q.704 - 3.3.7 m Y
10/8 Signalling link uninhibiting Q.704 - 3.3.8 m Y
10/9 Signalling route restricted Q.704 - 3.5.3 x Y
10/10 Signalling route unavailable Q.704 - 3.5.1 m Y
10/11 Signalling route available Q.704 - 3.5.2 m Y
10/12 Signalling point unavailable Q.704 - 3.7.1 m Y
10/13 Signalling point available Q.704 - 3.7.2 m Y
10/14 Signalling point congested Q.704 - 3.7.3 o (note) Y
10/15 Procedures used in connection with link congestion status changes Q.704 - 3.8.3 m Y
10/16 Congestion status of signalling route sets Q.704 - 3.8.4 m Y
10/17 Procedures used in connection with route set congestion status changes Q.704 - 3.8.5 m Y
NOTE: This option is implementation dependent.

Comments: 

Table A.11: Signalling traffic management
Item Procedure Reference Status Support
11/1 Normal routing situation Q.704 - 4.2 m Y
11/2 Signalling link unavailability Q.704 - 4.3 m Y
11/3 Signalling link availability Q.704 - 4.4 m Y
11/4 Signalling route unavailability Q.704 - 4.5 m Y
11/5 Signalling route availability Q.704 - 4.6 m Y
11/6 Signalling route restriction Q.704 - 4.7 x Y
11/7 Signalling point availability Q.704 - 4.8 m Y

Comments: 

Table A.12: Changeover
Item Procedure Reference Status Support
12/1 Changeover initiation and actions Q.704 - 5.3 m Y
12/2 Buffer updating procedures Q.704 - 5.4 m Y
12/3 Retrieval and diversion of traffic Q.704 - 5.5 m Y
12/4 Emergency changeover procedures Q.704 - 5.6 m (note) Y
12/5 Procedures in abnormal conditions Q.704 - 5.7 m Y
NOTE: The invocation of this procedure may be implementation dependent.

Comments: 

This E400P-SS7 implementation always initiates normal changeover. 

Table A.13: Changeback
Item Procedure Reference Status Support
13/1 Changeback initiation and actions Q.704 - 6.2 m Y
13/2 Sequence control procedures Q.704 - 6.3 m Y
13/3 Time-controlled procedure Q.704 - 6.4 m Y
13/4 Changeback between linksets always uses time controlled procedures Q.704 - 6.2.5 o Y
13/5 Changeback - abnormal conditions Q.704 - 6.5 m Y

Comments: 

Table A.14: Forced rerouting
Item Procedure Reference Status Support
14/1 Force rerouting initiation and actions Q.704 - 7.2 c141 Y

c141: if A.9/4 THEN m ELSE n/a 

Comments: 

Table A.15: Controlled rerouting
Item Procedure Reference Status Support
15/1 Controlled rerouting initiation and actions Q.704 - 8.2 c151 Y

c151: if A.9/5 THEN m ELSE n/a 

Comments: 

Table A.16: MTP restart
Item Procedure Reference Status Support
16/1 Actions in a restarting signalling point (having the transfer function) Q.704 - 9.2.1, 9.2.2, 9.2.4 c161 Y
16/2 Actions in a restarting signalling point (having no transfer function) Q.704 - 9.2.1, 9.2.3, 9.2.4 c162 Y
16/3 Actions in a signalling point X adjacent to a restarting signalling point Q.704 - 9.3 m Y
16/4 Short term isolations Q.704 - 9.4 m Y
16/5 Actions in signalling point X on receipt of unexpected TRA message. Q.704 - 9.5 m Y
16/6 All signalling routes to be allowed on restart in restarting node Q.704 - 9.6.1 m Y
16/7 All signalling routes through restarted adjacent node allowed unless TFPs have been received Q.704 - 9.6.2 c164 Y
16/8 Handling of signalling route set test messages Q.704 - 9.6.3 c161 Y
16/9 Handling of late link restorations or TFA reception in phase 2 after sending TFPs Q.704 - 9.6.4 1st sentence c161 Y
16/10 Handling of late link restorations or TFA reception in phase 2 before sending TFPs (see note) Q.704 - 9.6.4 2nd sentence c163 Y
16/11 Linkset failures or TFP reception in phase 2 are handled (within or after restart) Q.704 - 9.6.4 3rd sentence c161 Y
16/12 Availability of adjacent node through receipt of TFA or TRA Q.704 - 9.6.5 c164 Y
16/13 Discarding of messages during restart Q.704 - 9.6.6 m Y
16/14 Discarding of messages in adjacent point Q.704 - 9.6.7 m Y
16/15 Co-ordination of different MTP networks during restart Q.704 - 9.6.8 o Y
NOTE: Comments on the implementation of this option should be given.

c161: IF A.9/3 THEN m ELSE n/a
c162: IF A.9/3 THEN n/a ELSE m
c163: IF A.9/3 THEN o ELSE n/a
c164: IF A.9/3 THEN m ELSE n/a 

Comments: 

Table A.17: Management inhibiting
Item Procedure Reference Status Support
17/1 Inhibiting initiations and actions Q.704 - 10.2 m Y
17/2 Unihibiting initiations and actions Q.704 - 10.3 m Y
17/3 Receipt of unexpected management inhibition messages Q.704 - 10.4 m Y
17/4 Management inhibited link status and processor recovery Q.704 - 10.5 m Y
17/5 Inhibit test procedure Q.704 - 10.6 m Y

Comments: 

Table A.18: Signalling traffic flow control
Item Procedure Reference Status Support
18/1 Signalling routeset unavailability Q.704 - 11.2.1 m Y
18/2 Signalling routeset availability Q.704 - 11.2.2 m Y
18/3 Count on message Q.704 - 11.2.3.1 o.1 Y
18/4 Count on octet Q.704 - 11.2.3.1 o.1 N
18/5 for the congested routeset Q.704 - 11.2.3.1 o.2 Y
18/6 for any link of the congested routeset Q.704 - 11.2.3.1 o.2 N
18/7 for any linkset of the congested routeset Q.704 - 11.2.3.1 o.2 N
18/8 for any congested link of the congested routeset Q.704 - 11.2.3.1 o.2 N
18/9 User Part unavailability control - sending UPU Q.704 - 11.2.7 o Y
18/10 User Part availability control - receiving UPU Q.704 - 11.2.7 m Y

o.1: One, and only one option shall be chosen
o.2: One, and only one option shall be chosen 

Comments: 

Table A.19: Signalling link management
Item Procedure Reference Status Support
19/1 Basic signalling link management procedures Q.704 - 12.2 m Y
19/2 Signalling link management procedures based on automatic allocation of signalling terminals Q.704 - 12.3 x Y
19/3 Signalling link management procedures based on automatic allocation of signalling data links and signalling terminals Q.704 - 12.4 x Y
19/4 Automatic allocation of signalling terminals Q.704 - 12.5 x Y
19/5 Automatic allocation of signalling data links Q.704 - 12.6 x Y
19/6 Different signalling link management procedures at the two ends of a link set Q.704 - 12.7 x Y
NOTE: Items 19/2 and 19/4 have no protocol relevance.

Comments: 

Note: automatic allocation of signalling data terminals and signalling data links has not been implemented for any protocool variant profile to this date. 

Table A.20: Signalling route management
Item Procedure Reference Status Support
20/1a Transfer prohibited Q.704 - 13.2.1, 13.2.2 c201 Y
20/1b Transfer prohibited Q.704 - 13.2.3, 13.2.4 c202 Y
20/2a Transfer allowed Q.704 - 13.3.1, 13.3.2 c201 Y
20/2b Transfer allowed Q.704 - 13.3.3, 13.3.4 c202 Y
20/3 Transfer restricted (national option) Q.704 - 13.4 x Y
20/4 Signalling-route-set-test Q.704 - 13.5 c202 Y
20/5 Transfer controlled (international network) Q.704 - 13.6 c203 Y
20/6 Transfer controlled (national option with congestion priorities) Q.704 - 13.7 x Y
20/7 Transfer controlled (national option without congestion priorities) Q.704 - 13.8 x Y
20/8 Signalling-route-set-congestion-test (national option) Q.704 - 13.9 x Y

c201: IF A.9/3 THEN m ELSE x
c202: IF A.9/3 THEN m ELSE n/a
c203: IF A.9/3 THEN m ELSE o 

Comments: 

A.5.3  Timers used in MTP level 2

The supplier of the implementation shall state whether or not the following timers, used by the MTP level 2 protocol, as specified in ITU-T Recommendation Q.703 as modified by ETS 300 008-1 [1] are supported and their values or range(s), in the table below: 

Table A.21: Timers - MTP level 2
Item Timer Reference Status Support Values allowed Values supported
21/1 T1(64) Q.703 - 12.3 m Y 40 - 50 s 4000 .. 5000 ms
21/2 T1(4.8) Q.703 - 12.3 n/a n/a 500 - 600 s -
21/3 T2low Q.703 - 12.3 n/a n/a 5 - 50 s -
21/4 T2high Q.703 - 12.3 n/a n/a 70 - 150 s -
21/5 T3 Q.703 - 12.3 m Y 1 - 2 s 1000 .. 2000 ms
21/6 T4n(64) Q.703 - 12.3 m Y 7,5 - 9,5 s 7500 .. 9500 ms
21/7 T4n(4.8) Q.703 - 12.3 n/a n/a 100 - 120 s -
21/8 T4e(64) Q.703 - 12.3 m Y 400 - 600 ms 400 .. 600 ms
21/9 T4e(4.8) Q.703 - 12.3 n/a n/a 6 - 8 s -
21/10 T5 Q.703 - 12.3 m Y 80 - 120 ms 80 .. 120 ms
21/11 T6(64) Q.703 - 12.3 m Y 3 - 6 s 3000 .. 6000 ms
21/12 T6(4.8) Q.703 - 12.3 n/a n/a 8 - 12 s -
21/13 T7(64) Q.703 - 12.3 m Y 0,5 - 2 s 500 .. 2000 ms
21/14 T7(4.8) Q.703 - 12.3 n/a n/a 4 - 6 s -

Comments: 

Timer ranges, minimums and maximums are as proscribed. (Timers are not implemented for 4.8 kbit/s operation as 4.8 kbit/s operation is not supported at this time.) 

Timers are only accurate to plus or minus 10 milliseconds. Timer duration values can only be assigned with a precision of 10 milliseconds. 

A.5.4  Timers used in MTP level 3

The supplier of the implementation shall state whether or not the following timers, used by the MTP level 3 protocol, as specified in ITU-T Recommendation Q.704 as modified by ETS 300 008-1 [1] are supported and their values or range(s), in the table below: 

Table A.22: Timers - MTP level 3
Item Timer Reference Status Support Values allowed Values supported
22/1 T1 Q.704 - 16.8 m Y 500 - 1200 ms 500 .. 1200 ms
22/2 T2 Q.704 - 16.8 m Y 700 - 2000 ms 700 .. 2000 ms
22/3 T3 Q.704 - 16.8 c222 Y 500 - 1200 ms 500 .. 1200 ms
22/4 T4 Q.704 - 16.8 m Y 500 - 1200 ms 500 .. 1200 ms
22/5 T5 Q.704 - 16.8 m Y 500 - 1200 ms 500 .. 1200 ms
22/6 T6 Q.704 - 16.8 c222 Y 500 - 1200 ms 500 .. 1200 ms
22/7 T7 Q.704 - 16.8 n/a n/a 1 - 2 s -
22/8 T8 Q.704 - 16.8 c221 Y 800 - 1200 ms 800 .. 1200 ms
22/9 T9 Q.704 - 16.8 n/a n/a - -
22/10 T10 Q.704 - 16.8 c222 Y 30 - 60 s 30 .. 60 s
22/11 T11 Q.704 - 16.8 n/a n/a 30 - 90 s -
22/12 T12 Q.704 - 16.8 m Y 800 - 1500 ms 800 .. 1500 ms
22/13 T13 Q.704 - 16.8 m Y 800 - 1500 ms 800 .. 1500 ms
22/14 T14 Q.704 - 16.8 m Y 2 - 3 s 2 .. 3 s
22/15 T15 Q.704 - 16.8 n/a n/a 2 - 3 s -
22/16 T16 Q.704 - 16.8 n/a n/a 1.4 - 2 s -
22/17 T17 Q.704 - 16.8 m Y 800 - 1500 ms 800 .. 1500 ms
22/18 T19 Q.704 - 16.8 c221 Y implementation dependent & < T20 0 .. 58.90 s
22/19 T19 Q.704 - 16.8 m Y 67 - 69 s 67 .. 69 s
22/20 T20 Q.704 - 16.8 m Y 59 - 61 s 59 .. 61 s
22/21 T21 Q.704 - 16.8 m Y 63 - 65 s 63 .. 65 s
22/22 T22 Q.704 - 16.8 m Y 3 - 6 min 3 .. 6 min
22/23 T23 Q.704 - 16.8 m Y 3 - 6 min 3 .. 6 min
22/24 T24 Q.704 - 16.8 n/a n/a 500 ms -

c221: IF A.9/3 THEN m ELSE n/a
c222: IF A.9/5 THEN m ELSE n/a 

Comments: 

Timers are only accurate to plus or minus 10 milliseconds. Timer duration values can only be assigned with a precision of 10 milliseconds. 

A.5.5  Messages used in MTP level 2

The supplier of the implementation shall state whether or not the following messages, used by the MTP level 2 protocol, as specified in ITU-T Recommendation Q.701 and Q.703 as modified by ETS 300 008-1 [1] are supported, in the table below: 

The supplier shall indicate the status of support for sending and receiving each message. 

Table A.23: Messages - MTP level 2
Item Message Reference Sending
Status
Sending
Support
Receipt
Status
Receipt
Support
23/1 FISU Q.703 - 2 m Y m Y
23/2 LSSU with 1 octet SF size Q.703 - 2 o.3 Y m Y
23/3 LSSU with 2 octets SF size Q.703 - 2 o.3 N m Y
23/4 MSU Q.703 - 2 m Y m Y

o.3: At least one option shall be chosen. 

Comments: 

Table A.24: Treatment of spare fields
Item Procedure Reference Status Support
24/1 Spare fields/subfields handling Q.701 - 6.2 m Y

Comments: 

A.5.6  Messages used in MTP level 3

The supplier of the implementation shall state whether or not the following messages, used by the MTP level 3 protocol, as specified in ITU-T Recommendation Q.701 and Q.704 as modified by ETS 300 008-1 [1] are supported, in the table below: 

The supplier shall indicate the status of support for sending and receiving each message. 

Table A.25: Messages - MTP level 3
Item Message Reference Sending
Status
Sending
Support
Receipt
Status
Receipt
Support
25/1 COO Q.704 - 15.4 m Y m Y
25/2 COA Q.704 - 15.4 m Y m Y
25/3 CBD Q.704 - 15.5 m Y m Y
25/4 CBA Q.704 - 15.5 m Y m Y
25/5 ECO Q.704 - 15.6 m Y m Y
25/6 ECA Q.704 - 15.6 m Y m Y
25/7 RST Q.704 - 15.10 c254 Y c251 Y
25/8 RSR Q.704 - 15.10 x Y x Y
25/9 TFC Q.704 - 15.15 c252 Y m Y
25/10 TFP Q.704 - 15.7 c253 Y c254 Y
25/11 TFR Q.704 - 15.9 x Y x Y
25/12 TFA Q.704 - 15.8 c253 Y c254 Y
25/13 RCT Q.704 - 15.16 x Y x Y
25/14 LIN Q.704 - 15.11 o Y m Y
25/15 LUN Q.704 - 15.11 m Y m Y
25/16 LIA Q.704 - 15.11 o Y m Y
25/17 LUA Q.704 - 15.11 m Y m Y
25/18 LID Q.704 - 15.11 m Y m Y
25/19 LFU Q.704 - 15.11 m Y m Y
25/20 LLT Q.704 - 15.11 o Y m Y
25/21 LRT Q.704 - 15.11 c256 Y m Y
25/22 TRA Q.704 - 15.12 m Y m Y
25/23 DLC Q.704 - 15.13 x Y x Y
25/24 CSS Q.704 - 15.14 x Y x Y
25/25 CNS Q.704 - 15.15 x Y x Y
25/26 CNP Q.704 - 15.15 x Y x Y
25/27 UPU Q.704 - 15.17 c255 Y m Y

c251: if A.9/3 THEN m ELSE n/a
c252: if A.9/3 THEN m ELSE o
c253: if A.9/3 THEN m ELSE x
c254: if A.9/5 THEN m ELSE n/a
c255: if A.18/9 THEN m ELSE n/a
c256: if A.25/16 THEN m ELSE o 

Comments: 

Table A.26: Treatment of spare fields
Item Procedure Reference Status Support
26/1 Spare fields/subfields handling Q.701 - 6.2 m Y

Comments: 

A.5.7  Testing and maintenance procedures

A.5.7.1  Major capabilities in testing and maintenance procedures

The supplier of the implementation shall state whether or not the procedures described in ITU-T Recommendation Q.707 as modified by ETS 300 008-1 [1] are supported, in the table below. 

Table A.27: Testing and maintenance procedures
Item Procedure Reference Status Support
27/1 Signalling link testing (periodic) Q.707 - 2 m Y
27/2 Signalling link testing after activation or restoration Q.707 - 2 m Y
27/3 Responding to signalling test message Q.707 - 2 m Y
27/4 Signalling link goes out of service when the periodic test signal fails Q.707 - 2 m Y
NOTE: Specify the IUT behaviour if not supported.

Comments: 

A.5.7.2  Timers used in testing and maintenance procedures

The supplier of the implementation shall state whether or not the following timers, used by MTP testing and maintenance procedures, as specified in ITU-T Recommendation Q.707 as modified by ETS 300 008-1 [1], are supported and their values or range, in the table below: 

Table A.28: Timers - Testing and maintenance procedures
Item Timer Reference Status Support Values allowed Values supported
28/1 T1 Q.707 - 5.5 m Y 4 - 12 s 4 .. 12 s
28/2 T2 Q.707 - 5.5 c281 Y 30 - 90 s 30 .. 90 s

c281: IF A.27/1 THEN m ELSE n/a 

Comments: 

A.5.7.3  Messages used in testing and maintenance procedures

The supplier of the implementation shall state whether or not the messages used by MTP testing and maintenance procedures as specified in ITU-T Recommendation Q.707 as modified by ETS 300 008-1 [1] are supported, in the table below: 

The supplier shall indicate the status of support for sending and receiving each message. 

Table A.29: Messages - Testing and maintenance procedures
Item Message Reference Sending
Status
Sending
Support
Receipt
Status
Receipt
Support
29/1 SLTM Q.707 - 5.4 m Y m Y
29/2 SLTA Q.707 - 5.4 m Y m Y

Comments: 

A.5.8  Protocol error handling

The supplier of the implementation shall state whether or not the protocol error handling functions for MTP as specified specified in ITU-T Recommendation Q.701 as modified by ETS 300 008-1 [1] are supported, in the table below: 

Table A.30: Invalid messages for MTP3
Item Procedure Reference Status Support
30/1 Messages containing an unallocated SIO value Q.701 - 6.1.1 o Y
30/2 Messages containing an unallocated H0/H1 code Q.701 - 6.1.2 m Y
30/3 Messages containing an unallocated value in a recognized field Q.701 - 6.1.3 m Y

Comments: 

A.5.9  Transit time requirements

This paragraph deals with the requirements described in ITU-T Recommendation Q.706 as modified by ETS 300 008-1 [1] about message transfer time. 

Table A.31: Security requirements
Item Procedure Reference Status Support
31/1 Type of security arrangements Q.706 - 4.5.1 o N
31/2 Time to initiate changeover Q.706 - 4.5.2 o N
31/3 Changeover performance times Q.706 - 4.5.3 o N

Comments: 

Table A.32: Priorities
Item Procedure Reference Status Support
32/1 Priorities requirements Q.706 - 4.7 o N

Comments: 

Table A.33: Estimates for message transfer times
Item Procedure Reference Status Support
33/1 Estimates for Tcs Q.706 - 5.1 o N
33/2 Estimates for STP processor handling time Tph Q.706 - 5.3 o N

Comments: 

A.5.10  Interworking requirements

This subclause deals with interworking (with CCITT Yellow (1980), Red (1984) and Blue (1988) Books) problems described in ITU-T Recommendation Q.701 as modified by ETS 300 008-1 [1]. 

Table A.34: CCITT Red Book (1984) to ITU-T White Book (1993)
Item Procedure Reference Status Support
34/1 Solution to the SIF length increase problem Q.701 - 7.2.5/6 x Y

Comments: 

Table A.35: CCITT Yellow Book (1980) to ITU-T White Book (1993)
Item Procedure Reference Status Support
35/1 Solution to the SIF length increase problem Q.701 - 7.2.5/6 x Y

Comments: 

OpenSS7
SS7 for the
Common Man
Home Top Index FirstPrev Next LastMore Download Info FAQ Mail  Home -> Documentation -> Conformance -> SS7 Stack -> MTP Level 3 -> ETSI MTP3 PICS
Last modified: Sun, 05 Mar 2006 08:34:15 GMT
© Copyright 1997-2007 OpenSS7 Corporation All Rights Reserved.