OpenSS7
SS7 for the
Common Man
© Copyright 1997-2007 OpenSS7 Corporation All Rights Reserved.
Last modified: Fri, 12 Dec 2008 01:42:00 GMT
Home TopIndex FirstPrev Next LastMore Download Info FAQ Mail  Home -> Documentation -> SIGTRAN -> draft-stewart-tsvwg-prsctp-01
Quick Links

Download

SCTP

SIGTRAN

SS7

Hardware

STREAMS

Asterisk

Related

Package

Manual

FAQ

SIGTRAN

SCTP

UA

TUA

SUA

ISUA

M3UA

M2UA

M2PA

IUA

TALI

SS7 over IP

Documentation

FAQ

SIGTRAN

Design

Conformance

Performance

References

Man Pages

Manuals

Papers

Home

Overview

Status

Documentation

Resources

About

News

draft-stewart-tsvwg-prsctp-01

Description: Request For Comments

You can download source copies of the file as follows:

draft-stewart-tsvwg-prsctp-01.txt in text format.

Listed below is the contents of file draft-stewart-tsvwg-prsctp-01.txt.




Network Working Group                                         R. Stewart
Internet-Draft                                                M. Ramalho
Expires: December 30, 2002                           Cisco Systems, Inc.
                                                                  Q. Xie
                                                          Motorola, Inc.
                                                               M. Tuexen
                                                              Siemens AG
                                                               P. Conrad
                                                       Temple University
                                                               July 2002

                   SCTP Partial Reliability Extension
                   draft-stewart-tsvwg-prsctp-01.txt

Status of this Memo

   This document is an Internet-Draft and is in full conformance with
   all provisions of Section 10 of RFC2026.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at http://
   www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on December 30, 2002.

Copyright Notice

   Copyright (C) The Internet Society (2002).  All Rights Reserved.

Abstract

   This memo describes an extension to the Stream Control Transmission
   Protocol (SCTP) RFC2960 [4] that allows an SCTP endpoint to signal to
   its peer that it should move the cumulative ack point forward.  When
   both sides of an SCTP association support this extension, it can be
   used by an SCTP implementation to provide partially reliable data

Stewart, et al.         Expires December 30, 2002               [Page 1]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

   transmission service to an upper layer protocol.  This memo describes
   (1) the protocol extensions, which consist of a new parameter for
   INIT and INIT ACK, and a new FORWARD TSN chunk type (2) one example
   partially reliable service that can be provided to the upper layer
   via this mechanism.

Table of Contents

   1.    Introduction . . . . . . . . . . . . . . . . . . . . . . . .  5
   1.1   Overview of Protocol Extensions  . . . . . . . . . . . . . .  5
   1.2   Overview of New Services Provided to the Upper Layer . . . .  5
   1.3   Benefits of PR-SCTP  . . . . . . . . . . . . . . . . . . . .  6
   2.    Conventions  . . . . . . . . . . . . . . . . . . . . . . . .  8
   3.    Protocol Changes to support PR-SCTP  . . . . . . . . . . . .  9
   3.1   Forward-TSN-Supported Parameter For INIT and INIT ACK  . . .  9
   3.2   Forward Cumulative TSN Chunk Definition (FORWARD TSN)  . . .  9
   3.3   Negotiation of Forward-TSN-Supported parameter . . . . . . . 10
   3.3.1 Sending Forward-TSN-Supported param in INIT  . . . . . . . . 10
   3.3.2 Receipt of Forward-TSN-Supported param in INIT or INIT-ACK . 11
   3.3.3 Receipt of Op. Error for Forward-TSN-Supported Param . . . . 11
   3.4   Definition of "dropped" in the context of PR-SCTP  . . . . . 12
   3.5   Sender Side Implementation of PR-SCTP  . . . . . . . . . . . 12
   3.6   Receiver Side Implementation of PR-SCTP  . . . . . . . . . . 15
   4.    Services provided by PR-SCTP to the upper layer  . . . . . . 17
   4.1   PR-SCTP Service Definition for "timed reliability" . . . . . 17
   4.2   PR-SCTP Association Establishment  . . . . . . . . . . . . . 19
   4.3   Guidelines for defining other PR-SCTP Services . . . . . . . 20
   4.4   Usage Notes  . . . . . . . . . . . . . . . . . . . . . . . . 21
   5.    Acknowledgments  . . . . . . . . . . . . . . . . . . . . . . 22
   6.    Security Considerations  . . . . . . . . . . . . . . . . . . 23
   7.    IANA Considerations  . . . . . . . . . . . . . . . . . . . . 24
         References . . . . . . . . . . . . . . . . . . . . . . . . . 25
         Authors' Addresses . . . . . . . . . . . . . . . . . . . . . 25
         Full Copyright Statement . . . . . . . . . . . . . . . . . . 27

Stewart, et al.         Expires December 30, 2002               [Page 2]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

1. Introduction

   This memo describes an extension to the Stream Control Transmission
   Protocol (SCTP) RFC2960 [4] that allows an SCTP sender to signal to
   its peer that it should no longer expect to receive one or more Data
   chunks.

1.1 Overview of Protocol Extensions

   The protocol extension described in this document consists of two new
   elements:

   1.  a single new parameter in the INIT/INIT-ACK exchange that
       indicates whether the endpoint supports the extension

   2.  a single new chunk type, FORWARD TSN, that indicates that the
       receiver should move its cumulative ack point forward (possibly
       skipping past one or more Data chunks that may not yet have been
       received and/or acknowledged.)

1.2 Overview of New Services Provided to the Upper Layer

   When this extension is supported by both sides of an SCTP
   association, it can be used to provide partially reliable transport
   service over an SCTP association.  We define partially reliable
   transport service as a service that allows the user to specify, on a
   per message basis, the rules governing how persistent the transport
   service should be in attempting to send the message to receiver.

   One example of partially reliable service is specified in this
   document, namely a "timed reliability" service.  This service allows
   the service user to indicate a limit on the duration of time that the
   sender should try to transmit/retransmit the message (this is a
   natural extension of the "lifetime" parameter already in the base
   protocol).

   In addition to this example, we will also show that defining the
   semantics of a particular partially reliable service involves two
   elements, namely:

   1.  how the service user indicates the level of reliability required
       for a particular message, and

   2.  how the sender side implementation uses that reliability level to
       determine when to give up on further retransmissions of that
       message.

Stewart, et al.         Expires December 30, 2002               [Page 3]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

   Note that other than the fact that the FORWARD-TSN chunk is required,
   neither of these two elements impacts the "on-the-wire" protocol;
   only the API, and the sender side implementation is affected by the
   way in which the service is defined to the upper layer.  Therefore,
   in principle, it is feasible to implement many varieties of partially
   reliable services in a particular SCTP implementation without
   changing the on-the-wire protocol.  Also, the SCTP receiver does not
   necessarily need to know which semantics of partially reliable
   service are being used by the sender, since the receiver's only role
   is to correctly interpret FORWARD TSN chunks, thereby skipping past
   messages that the sender has decided to no longer transmit (or
   retransmit).

   Nevertheless, it is recommended that a limited number of standard
   definitions of partially reliable services be standardized by the
   IETF so that that the designers of IETF application layer protocols
   can match the requirements of their upper layer protocols to standard
   service definitions provided by a particular SCTP implementation.
   One such definition, "timed reliability" is included in this
   document.  Given the extensions proposed in this document, other
   definitions may be standardized as the need arises without further
   changes to the on-the-wire protocol.

1.3 Benefits of PR-SCTP

   Hereafter, we use the notation "PR-SCTP" to refer to the SCTP
   protocol extended as defined in this document.

   The following are some of the advantages for integrating partially
   reliable data service into SCTP, i.e., benefits of PR-SCTP:

   1.  Some application layer protocols may benefit from being able to
       use a single SCTP association to carry both reliable content, --
       such as text pages, billing and accounting information, setup
       signaling -- and unreliable content, e.g.  state that is highly
       sensitive to timeliness, where generating a new packet is more
       advantageous than transmitting an old one [1].

   2.  Partially reliable data traffic carried by PR-SCTP will enjoy the
       same communication failure detection and protection capabilities
       as the normal reliable SCTP data traffic does.  This includes the
       ability to: - quickly detect a failed destination address; -
       fail-over to an alternate destination address, and; - be notified
       if the data receiver becomes unreachable.

   3.  In addition to providing unordered unreliable data transfer as
       UDP does, PR-SCTP can provide ordered unreliable data transfer
       service.

Stewart, et al.         Expires December 30, 2002               [Page 4]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

   4.  PR-SCTP employs the same congestion control and congestion
       avoidance for all data traffic, whether reliable or partially
       reliable  - this is very desirable since SCTP enforces TCP-
       friendliness (unlike UDP.)

   5.  Because of the chunk bundling function of SCTP, reliable and
       unreliable messages can be multiplexed over a single PR-SCTP
       association.  Therefore, the number of IP datagrams (and hence
       the network overhead) can be reduced versus having to send these
       different types of data using separate protocols.  Additionally,
       this multiplexing allows for port savings versus using different
       ports for reliable and unreliable connections.

Stewart, et al.         Expires December 30, 2002               [Page 5]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

2. Conventions

   The keywords MUST, MUST NOT, REQUIRED, SHALL, SHALL NOT, SHOULD,
   SHOULD NOT, RECOMMENDED, NOT RECOMMENDED, MAY, and OPTIONAL, when
   they appear in this document, are to be interpreted as described in
   RFC2119 [3].

   Comparisons and arithmetic on TSNs are governed by the rules in
   Section 1.6 of RFC2960 [4].

Stewart, et al.         Expires December 30, 2002               [Page 6]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

3. Protocol Changes to support PR-SCTP

3.1 Forward-TSN-Supported Parameter For INIT and INIT ACK

   The following new OPTIONAL parameter is added to the INIT and INIT
   ACK chunks.

       Parameter Name                       Status     Type Value
       -------------------------------------------------------------
       Forward-TSN-Supported                OPTIONAL    0xC000

   At the initialization of the association, the sender of the INIT or
   INIT ACK chunk shall include this OPTIONAL parameter to inform its
   peer that it is able to support the Forward TSN chunk.  The format of
   this parameter is defined as follows:

        0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
       |    Parameter Type = 0xC000    |  Parameter Length = 4         |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

       Type: 16 bit u_int

          0xC000, indicating Forward-TSN-Supported parameter

       Length: 16 bit u_int

          Indicate the size of the parameter i.e. 4.

3.2 Forward Cumulative TSN Chunk Definition (FORWARD TSN)

   The following new chunk type is defined:

       Chunk Type    Chunk Name
       ------------------------------------------------------
       0xC0           Forward Cumulative TSN (FORWARD TSN)

   This chunk shall be used by the data sender to inform the data
   receiver to adjust its cumulative received TSN point forward because
   some missing TSNs are associated with data chunks that SHOULD NOT be
   transmitted or retransmitted by the sender.

   Forward Cumulative TSN chunk has the following format:

         0                   1                   2                   3
         0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
        +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Stewart, et al.         Expires December 30, 2002               [Page 7]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

        |   Type = 0xC0 |  Flags = 0x00 |        Length = Variable      |
        +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
        |                      New Cumulative TSN                       |
        +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
        |         Stream-1              |       Steam Sequence-1        |
        +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
        \                                                               /
        /                                                               \
        +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
        |         Stream-N              |       Stream Sequence-N       |
        +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

        Chunk Flags:

          Set to all zeros on transmit and ignored on receipt.

        New Cumulative TSN: 32 bit u_int

         This indicates the new cumulative TSN to the data receiver. Upon
         the reception of this value, the data receiver MUST consider
         any missing TSNs earlier than or equal to this value as received
         and stop reporting them as gaps in any subsequent SACKs.

        Stream-N: 16 bit u_int

         This field holds a stream number that was skipped by this
         FWD-TSN.

        Stream Sequence-N: 16 bit u_int

         This field holds the sequence number associated with the stream
         that was skipped. The receiver of the FWD-TSN's can use the Stream-N
         and Stream Sequence-N fields to enable delivery of any stranded TSN's
         that remain on the stream re-ordering queues.

3.3 Negotiation of Forward-TSN-Supported parameter

3.3.1 Sending Forward-TSN-Supported param in INIT

   If an SCTP endpoint supports the FORWARD TSN chunk, then any time it
   sends an INIT during association establishment, it SHOULD include the
   Forward-TSN-supported parameter in the INIT chunk to indicate this
   fact to its peer.

Stewart, et al.         Expires December 30, 2002               [Page 8]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

3.3.2 Receipt of Forward-TSN-Supported param in INIT or INIT-ACK

   When a receiver of an INIT detects a Forward-TSN-Supported parameter,
   and does not support the Forward-TSN chunk type, the receiver SHOULD
   treat this parameter as an invalid or unrecognized parameter and
   respond to the data sender with an unrecognized paramater in the
   INIT-ACK, following the rules defined in Section 3.3.3 of RFC2960
   [4].

   When a receiver of an INIT-ACK detects a Forward-TSN-Supported
   parameter, and does not support the Forward-TSN chunk type, the
   receiver SHOULD treat this parameter as an invalid or unrecognized
   parameter and respond to the data sender with an unrecognized
   paramater error, following the rules defined in Section 3.3.3 of
   RFC2960 [4].  This error SHOULD be reported in an ERROR chunk bundled
   with the COOKIE-ECHO.

   When a receiver of an INIT detects a Forward-TSN-Supported parameter,
   and does support the Forward-TSN chunk type, the receiver SHOULD
   respond with a Forward-TSN-supported parameter in the INIT-ACK chunk.

   When an endpoint that supports the FORWARD TSN chunk receives an INIT
   that does not contain the Forward-TSN-Supported Parameter, that
   endpoint:

   o  MAY include the Forward-TSN-Supported parameter in the INIT-ACK,

   o  SHOULD record the fact that the peer does not support the FORWARD
      TSN chunk,

   o  MUST NOT send a FORWARD TSN chunk at any time during the
      associations life,

   o  SHOULD inform the upper layer, if the upper layer has requested
      such notification.

3.3.3 Receipt of Op. Error for Forward-TSN-Supported Param

   When an SCTP endpoint that desires to use the FORWARD TSN chunk
   feature for partially reliable data transfer receives an operational
   error from the remote endpoint (either bundled with the COOKIE or as
   a unrecognized parameter in the INIT-ACK), indicating that the remote
   endpoint does not recognize the Forward-TSN-Supported parameter, the
   local endpoint SHOULD inform its upper layer of the remote endpoint's
   inability to support partially reliable data transfer.

   The local endpoint may then choose to either:

Stewart, et al.         Expires December 30, 2002               [Page 9]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

      1) end the initiation process (in cases where the initiation
      process have already ended the endpoint may need to send an
      ABORT), in consideration of the peer's inability to supply the
      requested features for the new association, or

      2) continue the initiation process (in cases where the initiation
      process has already completed the endpoint MUST just mark the
      association as not supporting partial reliablilty), but with the
      understanding that partially reliable data transmission is not
      supported.  In this case, the endpoint receiving the operational
      error SHOULD note that the FORWARD TSN chunk is not supported, and
      MUST NOT transmit a FORWARD TSN chunk at any time during the life
      of the association.

3.4 Definition of "dropped" in the context of PR-SCTP

   At some point, a sending PR-SCTP implementation MAY determine that a
   particular data chunk SHOULD NOT be transmitted or retransmitted
   further, in accordance with the rules governing some particular PR-
   SCTP service definition (such as the definition of "timed
   reliability" in Section 4.1.) For purposes of this document, we
   define the term "dropped" to refer to any data chunk about which the
   SCTP sender has made this determination.

   Each PR-SCTP service defines the rules for determining when a TSN is
   "dropped", and accordingly, the rules that govern how, whether, and
   when to "drop" a TSN may vary from one service definition to another.
   However, the rules governing the actions taken when a TSN is
   "dropped" do NOT vary between service definitions; these rules are
   included in Section 3.5.

3.5 Sender Side Implementation of PR-SCTP

   The sender side implementation of PR-SCTP is identical to that of the
   base SCTP protocol, except for:

   o  actions a sending side PR-SCTP implementation must take when a TSN
      is "dropped" (as per the rules of whatever PR-SCTP service
      definition is in effect)

   o  special actions that a PR-SCTP implementation must take upon
      receipt of SACK

   o  rules governing generation of FORWARD TSN chunks.

   In detail, these exceptions are as follows:

Stewart, et al.         Expires December 30, 2002              [Page 10]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

   A1) The sender maintains an "Advanced.Peer.Ack.Point" for each peer
      to track a theoretical cumulative TSN point of the peer (Note,
      this is a _new_ protocol variable and its value is NOT necessarily
      the same as the SCTP "Cumulative TSN Ack Point" as defined in
      Section 1.4 of RFC2960 [4]) and discussed throughout that
      document.

   A2) From time to time, as governed by the rules of a particular PR-
      SCTP service definition (see Section 4), the SCTP data sender may
      make a determination that a particular data chunk that has already
      been assigned a TSN SHOULD be "dropped".

      When a data chunk is "dropped", the sender MUST treat the data
      chunk as being finally acked and no longer outstanding.

      Moreover, the sender MUST stop the T3-rtx timer if there are no
      other data chunks outstanding.

      However, the sender MUST NOT credit a "dropped" data chunk to the
      partial_bytes_acked as defined in Section 7.2.2 of RFC2960 [4],
      and the MUST NOT advance the cwnd based on this "dropped" data
      chunk.

   A3) Whenever the data sender receives a SACK from the data receiver,
      it MUST first process the SACK using the normal procedures as
      defined in Section 6.2.1 of RFC2960 [4].

      The data sender MUST then perform the following additional steps :

      C1) Let SackCumAck be the Cumulative TSN ACK carried in the
         received SACK.

         If (Advanced.Peer.Ack.Point < SackCumAck), then update
         Advanced.Peer.Ack.Point to be equal to SackCumAck.

      C2) Try to further advance the "Advanced.Peer.Ack.Point" locally,
         that is, to move "Advanced.Peer.Ack.Point" up as long as the
         chunk next in the out-queue space is marked as "dropped" as
         shown in the following example:

            Assuming that a SACK arrived with the Cumulative TSN ACK =
            102 and the Advanced.Peer.Ack.Point is updated to this
            value:

            out-queue at the end of  ==>   out-queue after Adv.Ack.Point
            normal SACK processing           local advancement

Stewart, et al.         Expires December 30, 2002              [Page 11]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

                         ...                            ...
            Adv.Ack.Pt-> 102 acked                      102 acked
                         103 dropped                    103 dropped
                         104 dropped        Adv.Ack.P-> 104 dropped
                         105                            105
                         106 acked                      106 acked
                         ...                            ...

            In this example, the data sender successfully advanced the
            "Advanced.Peer.Ack.Point" from 102 to 104 locally.

      C3) If, after step C1 and C2, the "Advanced.Peer.Ack.Point" is
         greater than the Cumulative TSN ACK carried in the received
         SACK, the data sender MUST send the data receiver a FORWARD TSN
         chunk containing the latest value of the
         "Advanced.Peer.Ack.Point".

      C4) For each "dropped" TSN the sender of the FORWARD TSN SHOULD
         list each stream and sequence number in the forwarded TSN.
         This dropped information will enable the receiver to easily
         find any stranded TSN's waiting on stream reorder queues.  Each
         stream SHOULD only be reported once, this means that if
         multiple drop's occur in the same stream then only the highest
         dropped stream sequence number is reported.  If the total size
         of the FORWARD TSN does NOT fit in a single MTU then the sender
         of the FORWARD TSN MAY either apply IP fragmentation OR lower
         the Advanced.Peer.Ack.Point to the last TSN that will fit in a
         single MTU.

   The following additional rules govern the generation of FORWARD TSN
   chunks:

   F1) An endpoint MUST NOT use the FORWARD TSN for any purposes other
      than circumstances described in this document.

   F2) The data sender SHOULD always attempt to bundle an outgoing
      FORWARD TSN with outbound DATA chunks for efficiency.

      A sender MAY even choose to delay the sending of the FORWARD TSN
      in the hope of bundling it with an outbound DATA chunk.

      IMPLEMENTATION NOTE: An implementation may allow the maximum delay
      for generating a forward TSN to be configured either statically or
      dynamically in order to meet the specific timing requirements of
      the protocol being carried, but see the next rule:

   F3) Any delay applied to the sending of FORWARD TSN chunk SHOULD NOT

Stewart, et al.         Expires December 30, 2002              [Page 12]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

      exceed 200ms and MUST NOT exceed 500ms.  In other words an
      implementation MAY lower this value below 500ms but MUST NOT raise
      it above 500ms.

      NOTE: Delaying the sending of FORWARD TSN chunks may cause delays
      in the receiver's ability to deliver earlier unreliable data being
      held at the receiver for re-ordering.

   F4) The detection criterion for out-of-order SACKs MUST remain the
      same as stated in RFC2960, that is, a SACK is only considered out-
      of-order if the Cumulative TSN ACK carried in the SACK is earlier
      than that of the previous received SACK (i.e., the comparison MUST
      NOT be made against "Advanced.Peer.Ack.Point").

3.6 Receiver Side Implementation of PR-SCTP

   The receiver side implementation of PR-SCTP at an SCTP endpoint A is
   capable of supporting any PR-SCTP service definition used by the
   sender at end point B, even if that service definition is not
   supported by the sending side functionality of host A.  All that is
   necessary is that the receiving side correctly handle the Forward-
   TSN-Supported parameter as specified in Section 3.3, and correctly
   handle the receipt of FORWARD TSN chunks as specified below.

   DATA chunk arrival at a PR-SCTP receiver proceeds exactly as for DATA
   chunk arrival at a base protocol SCTP receiver---that is, the
   receiver MUST perform the same TSN handling including duplicate
   detection, gap detection, SACK generation, cumulative TSN
   advancement, etc.  as defined in RFC2960 [4]---with the following
   exceptions and additions.

   When a FORWARD TSN chunk arrives, the data receiver MUST first update
   its cumulative TSN point to the value carried in the FORWARD TSN
   chunk, and then MUST further advance its cumulative TSN point locally
   if possible, as shown by the following example:

      Assuming that the new cumulative TSN carried in the arrived
      FORWARD TSN is 103:

       in-queue before processing      in-queue after processing the
            the FORWARD TSN      ==>   the FORWARD TSN and further
                                                advancement

       cum.TSN.Pt-> 102 received                   102 --

Stewart, et al.         Expires December 30, 2002              [Page 13]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

                    103 missing                    103 --
                    104 received                   104 --
                    105 received      cum.TSN.Pt-> 105 received
                    106 missing                    106 missing
                    107 received                   107 received
                    ...                            ...

      In this example, the receiver's cumulative TSN point is first
      updated to 103 and then further advanced to 105.

   After the above processing, the data receiver MUST stop reporting any
   missing TSNs earlier than or equal to the new cumulative TSN point.

   Note, if the "New Cumulative TSN" value carried in the arrived
   FORWARD TSN chunk is found to be behind the current cumulative TSN
   point, the data receiver MUST treat this FORWARD TSN as out-of-date
   and silently discard it.

   Whenever a DATA chunk arrives with the 'U' bit set to '0' (indicating
   ordered delivery) and is out of order, the receiver must hold the
   chunk for reordering.  Since it is possible with PR-SCTP that a DATA
   chunk being waited upon will not be retransmitted, special actions
   will need to be taken upon the arrival of a FORWARD TSN.

   In particular, during processing of a FORWARD TSN, the receiver MUST
   use the stream sequence information to examine all of the listed
   stream reordering queues, and immediately make available for delivery
   stream sequence numbers earlier than or equal to the stream sequence
   number listed inside the FORWARD TSN.

   After receiving and processing a FORWARD TSN, the data receiver MUST
   take cautions in updating its re-assembly queue.  The receiver MUST
   remove any partially reassembled message which is still missing one
   or more TSNs earlier than or equal to the new cumulative TSN point.
   In the event that the receiver has invoked the partial delivery API a
   notification SHOULD also be generated to inform the upper layer API
   that the message being partially delivered will NOT be completed.

Stewart, et al.         Expires December 30, 2002              [Page 14]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

4. Services provided by PR-SCTP to the upper layer

   As described in Section 1.2, it is feasible to implement a variety of
   partially reliable transport services using the new protocol
   mechanisms introduced in Section 3; introducing these new services
   requires making changes only at the sending side API, and the sending
   side protocol implementation.  Thus, there may be a temptation to
   standardize only the protocol, and leave the service definition as
   "implementation specific" or leave it to be defined in
   "informational" documents.

   However, for those who may wish to write IETF standards for upper
   layer protocols implemented over PR-SCTP, it is important to be able
   to refer to a standard definition of services provided.  Therefore,
   this section provides an example definitions of one such service,
   while also providing guidelines for the definition of additional
   services as required.  Each such service may be proposed as a
   separate new standard.

   Section 4 is organized as follows:

      Section 4.1 provides the definition of one specific PR-SCTP
      service: timed reliability.

      Section 4.2 describes how a particular PR-SCTP service definition
      is requested by the upper layer during association establishment,
      and how the upper layer is notified if that request cannot be
      satisfied.

      Section 4.3 then provides guidelines for the specification of PR-
      SCTP services other then the one defined in this memo.

      Finally, Section 4.4 describes some additional usage notes that
      upper layer protocol designers and implementors may find helpful.

4.1 PR-SCTP Service Definition for "timed reliability"

   The "timed reliability" service is a natural extension of the
   "lifetime" concept already present in the base SCTP protocol.

   When this service is requested for an SCTP association, it changes
   the meaning of the lifetime parameter specified in the SEND primitive
   (see Section 10.1, part (E) of RFC2960 [4]; note that the parameter
   is spelled "life time" in that document.)

   In the base SCTP protocol, the lifetime parameter is used to avoid
   sending stale data.  When a lifetime value is indicated for a

Stewart, et al.         Expires December 30, 2002              [Page 15]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

   particular message, SCTP cancels the sending of this message, and
   notifies the ULP if the first transmission of the data does not take
   place (because of rwnd or cwnd limitations, or for any other reason)
   before the lifetime expires.  However, in the base protocol, if SCTP
   has sent the first transmission before the lifetime expires, then the
   message MUST be sent as a normal reliable message.  During episodes
   of congestion this is particularly unfortunate, as retransmission
   wastes bandwidth that could have been used for other (non-lifetime
   expired) messages.

   When the "timed reliability" service is invoked, this latter
   restriction is removed.  Specifically, when the "timed reliability"
   service is in effect, the following rules govern all messages that
   are sent with a lifetime parameter:

   TR1) If the lifetime parameter of a message is SCTP_LIFETIME_RELIABLE
      (or unspecified) that message is treated as a normal reliable SCTP
      message, just as in the base SCTP protocol.

   TR2) If the lifetime parameter is not SCTP_LIFETIME_RELIABLE, then
      the SCTP sender MUST treat the message just as if it were a normal
      reliable SCTP message as long as the lifetime has not yet expired.

   TR3) Before assigning a TSN to any message, the SCTP sender MUST
      evaluate the lifetime of that message.  If it is expired, the SCTP
      sender MUST NOT assign a TSN to that message, but instead, SHOULD
      issue a notification to the upper layer and drop the message.

   TR4) Before transmitting or retransmitting a message for which a TSN
      is already assigned, the SCTP sender MUST evaluate the lifetime of
      the message.  If the lifetime of the message is expired, the SCTP
      sender MUST "drop" the message, as per the rules specified in
      Section 3.5.

   TR5) The sender MAY evaluate the lifetime of messages at anytime.
      Expired messages that have not been assigned a TSN MAY be handled
      as per rule TR3.  Expired messages that HAVE been assigned a TSN
      MAY be handled as per rule TR4.

   Implementation Note: Rules TR1 through TR4 are designed in such as
   way to avoid requiring the implementer to maintain a separate timer
   for each message; instead, the lifetime need only be evaluated at
   points in the life of the message where actions are already being
   taken, such as TSN assignment, transmission, or expiration of a
   retransmission timeout.  Rule TR5 is intended to give the implementor
   flexibility to evaluate lifetime at any other convenient opportunity,
   WITHOUT requiring that lifetime be evaluated immediately at the point
   in time where it expires.

Stewart, et al.         Expires December 30, 2002              [Page 16]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

4.2 PR-SCTP Association Establishment

   An upper layer protocol (ULP) that uses PR-SCTP may need to know
   whether PR-SCTP can be supported on a given association.  Therefore,
   the ULP needs to have some indiciation of whether the FORWARD-TSN
   chunk is supported by its peer.

   Section 10.1 of RFC2960 [4] describes abstract primitives for the
   ULP-to-SCTP interface, while noting that "individual implementations
   must define their own exact format, and may provide combinations or
   subsets of the basic functions in single calls."

   In this section, we describe one additional return value that may be
   added to the ASSOCIATE primitive to allow an SCTP service user to
   indicate whether the FORWARD-TSN chunk is supported by its peer.

   RFC2960 indicates that the associate primitive "allows the upper
   layer to initiate an association to a specific peer endpoint".  It is
   structured as follows:

        Format: ASSOCIATE(local SCTP instance name, destination transport addr,
              outbound stream count)
        -> association id [,destination transport addr list]
           [,outbound stream count]

   This extension adds one new OPTIONAL return value, such that the new
   primitive reads as follows:

        Format: ASSOCIATE(local SCTP instance name, destination transport addr,
              outbound stream count )
        -> association id [,destination transport addr list]
           [,outbound stream count] [,forward tsn supported]

   NOTE: As per RFC2960, if the ASSOCIATE primitive is implemented as a
   non-blocking call, the new OPTIONAL return value shall be passed with
   the association parameters using the COMMUNICATION UP notification.

   The new OPTIONAL parameter "forward tsn supported" is a boolean flag:

   (0) false [default] indicates that FORWARD TSN is not supported by
      the peer.

   (1) true indicates that FORWARD TSN is supported by the peer.

Stewart, et al.         Expires December 30, 2002              [Page 17]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

4.3 Guidelines for defining other PR-SCTP Services

   Other PR-SCTP services may be defined and implemented as dictated by
   the needs of upper layer protocols.  If such upper layer protocols
   are to be standardized and require some particular PR-SCTP service
   other than the one defined in this document (i.e.  "timed
   reliability") than those additional PR-SCTP services should also be
   specified and standardized.

   It is suggested that any such additional service definitions be
   modeled after the contents of Section 4.1 .  In particular, the
   service definition should provide:

   1.  A description of how the service user specifies any parameters
       that need to be associated with a particular message (and/or any
       other communication that takes place between the application and
       the SCTP transport sender) that provides the SCTP transport
       sender with the information needed to determine when to give up
       on transmission of a particular message.

       Preferably this description should reference the primitives in
       the abstract API provided in Section 10 of RFC2960 [4],
       indicating any:

       *  changes to the interpretation of the existing parameters of
          existing primitives,

       *  additional parameters to be added to existing primitives
          (these should be OPTIONAL, and default values should be
          indicated),

       *  additional primitives that may be needed.

   2.  A description of the rules used by the sender side implementation
       to determine when to give up on messages that have not yet been
       assigned a TSN.  This description should also indicate what
       protocol events trigger the evaluation, and what actions to take
       (e.g.  notifications.)

   3.  A description of the rules used by the sender side implementation
       to determine when to give up on the transmission or
       retransmission of messages that have already been assigned a TSN,
       and may have been transmitted and possibly retransmitted zero or
       more times.

   Items (2) and (3) in the list above should also indicate what
   protocol events trigger the evaluation, and what actions to take if
   the determination is made that the sender should give up on

Stewart, et al.         Expires December 30, 2002              [Page 18]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

   transmitting the message (e.g.  notifications to the ULP.)

   Note that in any PR-SCTP service, the following rule MUST be
   specified to avoid a protocol deadlock:

   (G1) When the sender side implementation gives up on transmitting a
      message that has been assigned a TSN (i.e., when that message is
      "dropped", as defined in Section 3.4) the sender side MUST mark
      that TSN as eligible for forward TSN, and the rules in Section 3.4
      regarding the sending of FORWARD TSN chunks MUST be followed.

   Finally, a PR-SCTP service definition should specify a "canonical
   service name" to uniquely identify the service, and distinguish it
   from other PR-SCTP services.  This name can then be used in upper
   layer protocol standards, to indicate which PR-SCTP service
   definition is required by that upper layer protocol.  It can also be
   used in the documentation of APIs of PR-SCTP implementations to
   indicate how an upper layer indicates which definition of PR-SCTP
   service should apply.  The canonical service name for the PR-SCTP
   service defined in Section 4.1 is "timed reliability".

4.4 Usage Notes

   Detecting missing data in a PR-SCTP stream is useful for some
   applications (e.g.  Fiber channel or SCSI over IP).  With PR-SCTP
   this becomes possible - the upper layer simply needs to examine the
   stream sequence number of the arrived user messages of that stream to
   detect any missing data.  Note, this detection only works when all
   the messages on that stream are sent in order, i.e.  the "U" bit is
   not set.

Stewart, et al.         Expires December 30, 2002              [Page 19]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

5. Acknowledgments

   The authors would like to thank Brian Bidulock, Scott Bradner, Jon
   Berger, Armando L.  Caro Jr., John Loughney, Ivan Arias Rodriguez,
   Ian Rytina, Chip Sharp, and others for their comments.

Stewart, et al.         Expires December 30, 2002              [Page 20]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

6. Security Considerations

   [Open Issue TBD: Security issues are not discussed in this memo at
   this time, but will be added in a later version of this draft.]

Stewart, et al.         Expires December 30, 2002              [Page 21]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

7. IANA Considerations

   One new chunk type is added to SCTP ('0xC0') by this document.

Stewart, et al.         Expires December 30, 2002              [Page 22]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

References

   [1]  Clark, D. and D. Tennenhouse, "Architectural Considerations for
        a New Generation of Protocols", SIGCOMM 1990 pp. 200-208,
        September 1990.

   [2]  Bradner, S., "The Internet Standards Process -- Revision 3", BCP
        9, RFC 2026, October 1996.

   [3]  Bradner, S., "Key words for use in RFCs to Indicate Requirement
        Levels", BCP 14, RFC 2119, March 1997.

   [4]  Stewart, R., Xie, Q., Morneault, K., Sharp, C., Schwarzbauer,
        H., Taylor, T., Rytina, I., Kalla, M., Zhang, L. and V. Paxson,
        "Stream Control Transmission Protocol", RFC 2960, October 2000.

Authors' Addresses

   Randall R. Stewart
   Cisco Systems, Inc.
   8725 West Higgins Road
   Suite 300
   Chicago, IL  60631
   USA

   Phone: +1-815-477-2127
   EMail: rrs@cisco.com

   Michael A. Ramalho
   Cisco Systems, Inc.
   1802 Rue de la Porte
   Wall Township, NJ  07719-3784
   USA

   Phone: +1.732.449.5762
   EMail: mramalho@cisco.com

   Qiaobing Xie
   Motorola, Inc.
   1501 W. Shure Drive, #2309
   Arlington Heights, IL  60004
   USA

   Phone: +1-847-632-3028
   EMail: qxie1@email.mot.com

Stewart, et al.         Expires December 30, 2002              [Page 23]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

   Michael Tuexen
   Siemens AG
   ICN WN CS SE 5
   D-81359 Munich
   Germany

   Phone: +49 89 722 47210
   EMail: Michael.Tuexen@icn.siemens.de

   Phillip T. Conrad
   Temple University
   CIS Department
   Room 303, Computer Building (038-24)
   1805 N. Broad St.
   Philadelphia, PA  19122
   US

   Phone: +1 215 204 7910
   EMail: conrad@acm.org
   URI:   http://www.cis.temple.edu/~conrad

Stewart, et al.         Expires December 30, 2002              [Page 24]

Internet-Draft     SCTP Partial Reliability Extension          July 2002

Full Copyright Statement

   Copyright (C) The Internet Society (2002).  All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.

Stewart, et al.         Expires December 30, 2002              [Page 25]



OpenSS7
SS7 for the
Common Man
Home TopIndex FirstPrev Next LastMore Download Info FAQ Mail  Home -> Documentation -> SIGTRAN -> draft-stewart-tsvwg-prsctp-01
Last modified: Fri, 12 Dec 2008 01:42:00 GMT
© Copyright 1997-2007 OpenSS7 Corporation All Rights Reserved.