OpenSS7
SS7 for the
Common Man
© Copyright 1997-2007 OpenSS7 Corporation All Rights Reserved.
Last modified: Wed, 07 Jan 2009 07:35:40 GMT
Home TopIndex FirstPrev Next LastMore Download Info FAQ Mail  Home -> Documentation -> SIGTRAN -> draft-sigtran-m3ua-mib-00
Quick Links

Download

SCTP

SIGTRAN

SS7

Hardware

STREAMS

Asterisk

Related

Package

Manual

FAQ

SIGTRAN

SCTP

UA

TUA

SUA

ISUA

M3UA

M2UA

M2PA

IUA

TALI

SS7 over IP

Documentation

FAQ

SIGTRAN

Design

Conformance

Performance

References

Man Pages

Manuals

Papers

Home

Overview

Status

Documentation

Resources

About

News

draft-sigtran-m3ua-mib-00

Description: Request For Comments

You can download source copies of the file as follows:

draft-sigtran-m3ua-mib-00.txt in text format.

Listed below is the contents of file draft-sigtran-m3ua-mib-00.txt.



Network Working Group                                     Antonio Roque
INTERNET-DRAFT                                                 Ericsson

expires in six months                                 December 21,2000

                   SS7 MTP3-User Adaptation Layer (M3UA)
                  Management Information Base using SMIv2
                     <draft-sigtran-m3ua-mib-00.txt>

Status of This Memo

   This document is an Internet-Draft and is in full conformance with all
   provisions of Section 10 of RFC 2026. Internet-Drafts are working
   documents of the Internet Engineering Task Force (IETF), its areas,
   and its working groups. Note that other groups may also distribute
   working documents as Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six
   months and may be updated, replaced, or obsoleted by other
   documents at any time. It is inappropriate to use Internet-Drafts
   as reference material or cite them other than as "work in
   progress".

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/lid-abstracts.txt

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

Abstract

   The MTP3-User Adaptation Layer is a protocol for the transport of 
   any SS7 MTP3-User signalling (e.g., ISUP and SCCP messages) over IP
   using the services of the Stream Control Transmission Protocol.  Also, 
   provision is made for protocol elements that enable a seamless 
   operation of the MTP3-User peers in the SS7 and IP domains. This 
   protocol would be used between a Signalling Gateway (SG) and a Media 
   Gateway Controller (MGC) or IP-resident Database.  It is assumed that 
   the SG receives SS7 signalling over a standard SS7 interface using the 
   SS7 Message Transfer Part (MTP) to provide transport. 

   This memo defines the Management Information Base (MIB) module which 
   describes the minimum amount of objects needed to manage the implementation 
   of the SCTP.

Open Issues

   - Remove this section.
   
   - Remove Revision History

   - Decide under which object identifier branch of the SNMP tree, M3UA 
     will be placed (value obtained when submitted to the IETF editor).

   - Update references to drafts.

Table of Contents

   1. Introduction ................................................
   1.1 Abbreviations ..............................................
   2. The SNMP framework ..........................................
   3. Structure of the MIB ........................................
   3.1 Protocol General Variables .................................
   3.2 Protocol General Statistics ................................
   3.3 M3UA Tables ................................................
   4. Definitions .................................................    
   4.1 Conformance Information ....................................    
   4.1.1 Compliance Statements ....................................    
   4.1.2 Units of Conformance .....................................    
   5. References ..................................................   
   6. Security Considerations .....................................   
   7. Acknowledgements ............................................
   8. Authors' Addresses ..........................................   
   9. Revision History ............................................   

1.  Introduction

This memo defines the Management Information Base (MIB) module which 
describes managed objects for implementations of the SCTP.

The document starts with a brief description of the SNMP framework and 
continues with the MIB explanation and security consideration among 
others. 

Terms related to the SCTP architecture are explained in [1]. Other 
especific abbreviations are listed below.

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].

1.1  Abbreviations

AS	- Application Server
ASP	- Application Server Process
ASPM	- Application Server Process Management
CIC	- Circuit Identification Code
DPC	- Destination Point Code
IPSP	- IP Server Process
MIB     - Management Information Base
M3UA    - SS7 MTP3-User Adaptation Layer
NA	- Network Appearance
NI	- Network Indicator
OPC	- Origination Point Code
PC	- Point Code
SCTP	- Stream Control Transmision Protocol
SG	- Signaling Gateway
SI	- Service Indicator
SMI     - Structure of Management Information
SNMP    - Simple Network Management Protocol
SP	- Signaling Process
SSN	- Subsystem Number

2.  The SNMP Framework

   The SNMP Management Framework presently consists of five major
   components:
   
   -  An overall architecture, described in RFC 2271 [SNMPArch].
   
   -  Mechanisms for describing and naming objects and events for the
      purpose of management.  The first version of this Structure of
      Management Information (SMI) is called SMIv1 and described in
      RFC 1155 [SMIv1], RFC 1212 [SNMPv1MIBDef] and RFC 1215
      [SNMPv1Traps].  The second version, called SMIv2, is described
      in RFC 1902 [SMIv2], RFC 1903 [SNMPv2TC] and RFC 1904
      [SNMPv2Conf].
   
   -  Message protocols for transferring management information.  The
      first version of the SNMP message protocol is called SNMPv1
      and described in RFC 1157 [SNMPv1].  A second version of the
      SNMP message protocol, which is not an Internet standards
      track protocol, is called SNMPv2c and described in RFC 1901
      [SNMPv2c] and RFC 1906 [SNMPv2TM].  The third version of the
      message protocol is called SNMPv3 and described in RFC 1906
      [SNMPv2TM], RFC 2272 [SNMPv3MP] and RFC 2574 [SNMPv3USM].
   
   -  Protocol operations for accessing management information.  The
      first set of protocol operations and associated PDU formats is
      described in RFC 1157 [SNMPv1].  A second set of protocol
      operations and associated PDU formats is described in RFC 1905
      [SNMPv2PO].
   
   -  A set of fundamental applications described in RFC 2273
      [SNMPv3App] and the view-based access control mechanism
      described in RFC 2575 [SNMPv3VACM].
   
   Managed objects are accessed via a virtual information store,
   termed the Management Information Base or MIB.  Objects in the MIB
   are defined using the mechanisms defined in the SMI.  This memo
   specifies a MIB module that is compliant to the SMIv2.  A MIB
   conforming to the SMIv1 can be produced through the appropriate
   translations.  The resulting translated MIB must be semantically
   equivalent, except where objects or events are omitted because no
   translation is possible (use of Counter64).  Some machine-readable
   information in SMIv2 will be converted into textual descriptions
   in SMIv1 during the translation process.  However, this loss of
   machine-readable information is not considered to change the
   semantics of the MIB.

3.  Structure of the MIB

The MIB is structured in the following way:

			    m3uaMib
			   /	   \
		m3uaObjects	    m3uaConformance
		/      	\		/	   \
	m3uaScalars   m3uaTables     m3uaGroups  m3uaCompliances
							|
						   m3uaCompliance

where the following sections are described :
	- m3uaObjects, where all the M3UA objects are defined under 
	this branch.

		-m3uaScalars, where scalars values are placed. It is 
		divided in:

			- General variables, where the main M3UA 
			variables are listed. 

			- General Statistics for M3UA.

		- m3uaTables, to hold data from each Application Server,
                Application Server Process, Signaling Gateway, Signaling 
                Gateway Process, Signaling Point Endpoint and Routing Table 
		together with the main statistics per SP Endpoint.
		Local and Remote IP Address tables are included
		into the general Endpoint table to allow multiples 
		IP addresses in order to support the multihome feature.
	
	- m3uaConformance, for the Unit of Conformance.

		- m3uaGroups, M3UA MIB variables have been grouped according
		to their funcionality and the context they belong to (general
		variables, variables/statistics per AS, variables per ASP, 
                variables per SG, variables per SGP, variables per local IP 
		address and variables/statistics per remote IP address).

		- m3uaCompliances, Minimal list of objects in the M3UA MIB module
		that an agent developer must implement.

	
3.1  Objects

3.1.1  Scalars

3.1.1.1 Protocol General Variables

The first section of the MIB contains the general variables of the 
M3UA protocol. Maximum, minimum and initial values can be found here.

3.1.1.2 Protocol General Statistics

Statistics included here are related to the whole M3UA layer. Statistics
related to a specific Peer Association are defined inside its 
concerned table (context).

3.1.2  Tables

3.1.2.1 Application Server Table

Defines data related to an Application Server, its state and traffic
handling mode.

m3uaAsTable
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaAsId (index)					/	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaAsTrafficMode					/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaAsState			     			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaAsRowStatus		     			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

3.1.2.2 Application Server Process Table

Defines data related to an Application Server Process, its state and traffic
handling mode, and the Association ID of the association established to that
ASP.

Note that an ASP can maintain different states and traffic handling modes for
every AS it is serving, i.e. The ASP_1 may be ASP-ACTIVE(LOAD-SHARING) for AS_1,
ASP-INACTIVE for AS_2 and ASP-ACTIVE(OVER-RIDE) for AS_3. Then, one ASP table
will be created per every combination of AS and Association ID.

Several ASP will correspond to one SP Endpoint. They will be linked by the 
Association Id.

m3uaAspTable
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaAsId (index)					/	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaAspAssocId (index)				/	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaAspState			     			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

3.1.2.3 Signaling Gateway Table

Defines data related to a Signaling Gateway, its state and traffic
handling mode.

m3uaSgTable
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSgId (index)					/	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSgTrafficMode					/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSgState			     			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSgRowStatus		     			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

3.1.2.4 Signaling Gateway Process Table

Defines data related to a Signaling Gateway Process, its state and the 
Association ID that identifies that SGP.

An unique SGP corresponds to an unique SP Endpoint and SG ID. They will be 
linked by the Association Id.

m3uaSgpTable
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSgId (index)					/	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSgpAssocId  (index)				/	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSgpState			     			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSgpRowStatus		     			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

3.1.2.5 Routing Table

Every entry in this table contains the data that defines a Routing Key.

As a Routing Key may be composed of any combination of basic SS7 routing
elements, if an element is not included in the routing key, a default value
is assigned. This default value can continue being considered as an indexing
value itself.

m3uaRouting 
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaNA (index)					/	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaNI (index)					/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSI (index)		     			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaOPC (index)					/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaDPC (index)					/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSSN (index)					/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaCICmin (index)					/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaCICmax (index)					/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaPeerAppId						/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

3.1.2.6 Network Appearance Table

Defines the data specific to a Network Appearance.

m3uaNaTable 
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaNA (index)					/	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaNaNI						/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaNaMtp3ProtocolType				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaNaMtp3ProtocolVariant				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaNaMtp3ProtocolVersion				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

3.1.2.7 Signaling Process Endpoint Table

Defines data related to a Signaling Process Endpoint. 

A SP Endpoint identifies a peer node were a SGP, ASP or IPSP are running.

The table contains the Endpoint identifier and data related to the association
to that endpoint. 

This table is expanded with the Remote IP Address Table that
identify the endpoint and with the Local IP Address Table that identify the 
local node for that endpoint.

The table contains data related to the Association, as its state, number of
streams, and the Association ID, provided by SCTP when the association is 
established.

The main table also contains statistics data related to the M3UA messaging
exchanged through that association between the Signaling Processes that
hold the association.

m3uaSpEpTable
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpId (index)					/	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocId (index)				/	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocRemHostName				/ 	...	| 
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocRemPort					/ 	...	| 
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocReqOutStreams				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocOutStreams				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocIncStreams				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocState					/ 	...	| 
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocDataSent					/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocDataRecived                      	/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspupSent				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspupAckSent				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspacSent				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspacAckSent				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspdnSent				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspdnAckSent				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspiaSent				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspiaAckSent				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspupReceived                   		/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspupAckReceived                      	/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspacReceived                   		/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspacAckReceived                      	/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspdnReceived                   		/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspdnAckReceived                      	/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspiaReceived                    	/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocAspiaAckReceived                      	/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocNotifySent				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocErrorSent				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocNotifyReceived                      	/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocErrorReceived				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocDunaSent					/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocDavaSent					/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocSconSent					/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocDupuSent					/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocDaudSent					/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocDunaReceived				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocDavaReceived				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocSconReceived				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocDupuReceived				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpAssocDaudReceived				/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaSpEpRowStatus		     			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

3.1.2.8 Expanded Tables

3.1.2.8.1 Point Code Table

This table expand information in entries in Network Appearance Table.
A SG with several Network Appearances may be connected to different 
SS7 Networks and may be represented in each SS7 Network by different 
Point Codes.

m3uaNaPcTable
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaNA (index)					/	...	| 
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaNaPC(index)					/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaNaPcRowStatus		     			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

3.1.2.8.2 Local and Remote IP Address Tables

These tables expand information for SP Endpoint Tables. When an
SP Endpoint entry is created, a default free Association Id is assigned to
that entry. The Local and Remote IP Address Table that will be used to 
establish an association towards the SGP or ASPEP provided are stored in
these tables. When the SCTP Association is established, the Association Id
will be replaced by the one obtained from SCTP.
If the remote addresses change during association negotiation, they will be
updated in the corresponding table.

a) Table for local IP addressess information:
   This table stores information related to the local IP
   address/-es reserved for the association. It's indexed by 
   the IP address.

b) Table for remote IP addresses information:
   This table stores information related to the remote IP
   address/-es reserved for the association. It's indexed by 
   the IP addresses.  

Note that the IP address indexing the tables is valid for IPv4, IPv6 and 
DNS [RFC2851]. Therefore, IP address is defined by the Internet address
type and the value of the IP address, according to the Textual Conventions 
for Internet Network Address. 

However, DNS value is not being used to identify an IP address since it is 
only valid during initialization (once this stage is finished, both sides only 
use IP addresses). To keep the name of the remote peer, an entry has been 
created (m3uaAssocRemHostName) in the association table. When no DNS name is 
provided by the remote SCTP endpoint at init time, this value will be 
NULL. Otherwise, the received DNS name will be stored.

m3uaAssocLocalAddressTable
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaAssocId (index)					/	...	| 
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaAssocLocalAddressIPType(index)			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaAssocLocalAddressIP (index)   			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaAssocLocalAddressRowStatus    			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

m3uaAssocRemAddressTable
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaAssocId (index)					/	...	| 
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaAssocRemAddressIPType(index)			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaAssocRemAddressIP (index)   			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| m3uaAssocRemAddressRowStatus    			/ 	...	|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Every entry is explained when defining the MIB.

3.2  Conformance

3.2.1 Groups

This section includes all the variables defined in the MIB grouped by 
function(variables and statistics) and context (M3UA general parameters,
AS, ASP, SG and SGP context, local IP address context or remote IP address context).
Therefore following groups were created:
	
	- General variables for the M3UA layer
	- General statistics for the M3UA layer
	- Variables  for AS, ASP, SG and SGP, and variables per
	local and remote IP address
	- Statistics per remote SP endpoint

3.2.2 Compliance

Requirements of the M3UA MIB to be implemented.

4.  Definitions

M3UA-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32,  
    Counter32, Counter64, mib-2        
         FROM SNMPv2-SMI		-- RFC 2578
    TEXTUAL-CONVENTION,  RowStatus             
         FROM SNMPv2-TC			-- RFC 2579
    MODULE-COMPLIANCE, OBJECT-GROUP             
         FROM SNMPv2-CONF		-- RFC 2580
    InetAddressType, InetAddress             
         FROM INET-ADDRESS-MIB		-- RFC 2851
    ;

m3uaMIB MODULE-IDENTITY
    LAST-UPDATED "200101050000Z"
    ORGANIZATION "IETF SIGTRAN Working Group"
    CONTACT-INFO
             "       Antonio Roque Alvarez

             Postal: Ericsson Espana S. A.
                     C/Retama 7
                     28045 Madrid
                     Spain

             Phones: +34 91 339 3523

             Emails: Antonio.Roque@ericsson.com"

                         DESCRIPTION
            "The MIB module for managing M3UA implementation."
    REVISION      "200101050000Z"
    DESCRIPTION
            "MIB module developed for the SIGTRAN IETF group. Based on M3UAv4"
    ::= { xxxx }  -- IANA needs to choose this value 
                  -- when sent to the RFC editor

-- Top-level structure of the MIB

m3uaObjects      OBJECT IDENTIFIER ::= { m3uaMIB 1 }  
m3uaConformance  OBJECT IDENTIFIER ::= { m3uaMIB 2 }

m3uaScalars      OBJECT IDENTIFIER ::= { m3uaObjects 1 }
m3uaTables       OBJECT IDENTIFIER ::= { m3uaObjects 2 }

-- PROTOCOL GENERAL VARIABLES
-- **************************

m3uaVersion OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Identifies the current version of the M3UA."
    ::= { m3uaScalars 1 }

m3uaProcType OBJECT-TYPE
    SYNTAX      INTEGER {
                    sgp(1),     -- Signalling Gateway Process
                    asp(2),     -- Application Server Process
                    ipsp(3)     -- IP Server Process
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "This variable indicates the type of the process where the 
             M3UA layer is located."
    ::= { m3uaScalars 2 }

m3uaLocalPort OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Identifies the port of the M3UA service."
    ::= { m3uaScalars 3 }

m3uaTrValue OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "milliseconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "Initial value of the Failover timer Tr. Recommended
            value is 3000 milliseconds."
    ::= { m3uaScalars 4 }

m3uaTPaudValue OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "milliseconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "Initial value of the Periodic Audit timer TrPaud Recommended
            value is 5000 milliseconds."
    ::= { m3uaScalars 5 }

m3uaHeartBeat OBJECT-TYPE
    SYNTAX      INTEGER {
                    on(0),    -- Heartbeat is enabled.
                    off(1)    -- Heartbeat is disabled. No BEAT messages
                              -- sent but BEAT messages received are 
                              -- responded.
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "Activates or deactivates the heartbeat procedure at M3UA level."
    ::= { m3uaScalars 6 }

m3uaTBeatValue OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "milliseconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "Initial value of the HeartBeat timer TBeat. Recommended
            value is 1000 milliseconds."
    ::= { m3uaScalars 7 }

m3uaTAckValue OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "milliseconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "Initial value of the Retransmision timer TAck. Recommended
            value is 2000 milliseconds."
    ::= { m3uaScalars 8 }

m3uaSpLshMethod OBJECT-TYPE
    SYNTAX      INTEGER {
                    none(0),    -- Random
                    sls(1),     -- Basing on SLS
                    cic(2),     -- Basing on CIC
                    ssn(3),     -- Basing on SSN
                    dpg(4),     -- Basing on DPC
                    other(5)    -- Other method
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "This variable indicates the method to be used when the load
            must be shared between several ACTIVE Signaling Processes."
    ::= { m3uaScalars 9 }

m3uaStreamLshMethod OBJECT-TYPE
    SYNTAX      INTEGER {
                    none(0),    -- Random
                    sls(1),     -- Basing on SLS
                    cic(2),     -- Basing on CIC
                    ssn(3),     -- Basing on SSN
                    dpc(4),     -- Basing on DPC
                    other(5)    -- Other method
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "This variable indicates the method to be used when the load
            must be shared between several streams within the same 
            SCTP Association."
    ::= { m3uaScalars 10 }

m3uaMaxStreamInbound OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "Maximum number of incoming streams allowed when accepting
            a SCTP Association from a remote peer. Recommended value is 10."
    ::= { m3uaScalars 11 }

m3uaFailOverBuffering OBJECT-TYPE
    SYNTAX      INTEGER {
                    on(0),    -- Messages are buffered during FailOver
                    off(1)    -- No buffering. Messages are discarded
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "Activates or deactivates the buffering of messages during 
            failover."
    ::= { m3uaScalars 12 }

m3uaFailOverBuffSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "Size of the failover retransmision buffer. Recommended value is
            64 Kbytes. Only valid if failover buffer option has been set to
            ON."
    ::= { m3uaScalars 13 }

m3uaMaxPeerApplications OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Maximum number of remote applications ( ASs or SGs )."
    ::= { m3uaScalars 14 }

m3uaMaxSPperApplications OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Maximum number of Signaling Processes ( ASPs, IPSPs or SGPs )
            per remote application ( AS or SG)."
    ::= { m3uaScalars 15 }

-- PROTOCOL GENERAL STATISTICS

m3uaRoutingFailures OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of times a routing operation against Routing Table
            fails. No final SCTP Association ID is obtained from the routing
            operation. That is the reason why this is a general statistic
            instead a per association statistic."
    ::= { m3uaScalars 16 }

-- M3UA TABLES
-- ***********

-- The Application Server Table
-- ****************************

-- The Application Server table contains information about each
-- Application Server for which one or more routing keys can exist in the 
-- routing table. 
-- This table exist when the Proccess Type is SGP or IPSP.

m3uaAsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF M3uaAsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A table containing Application Server-specific information."
    ::= { m3uaTables 1 }

m3uaAsEntry OBJECT-TYPE
    SYNTAX      M3uaAsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "General common variables for the AS."
    INDEX   { m3uaAsId }
    ::= { m3uaAsTable 1 }

M3uaAsEntry ::= SEQUENCE {
	m3uaAsId				Unsigned32,
	m3uaAsState				INTEGER,
	m3uaAsTrafficMode			INTEGER,
	m3uaAsRowStatus				RowStatus
    }

m3uaAsId OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Application Server Identification Value."
    ::= { m3uaAsEntry 1 }

m3uaAsState OBJECT-TYPE
    SYNTAX      INTEGER {
                    active(1),
                    inactive(2),
                    down(3),
                    pending(4)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Current Application Server State. Based on the state
            of the ASPs which serve it."
    ::= { m3uaAsEntry 2 }

m3uaAsTrafficMode OBJECT-TYPE
    SYNTAX      INTEGER {
                    loadshare(1),
                    override(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Current Application Server traffic handling mode."
    ::= { m3uaAsEntry 3 }

m3uaAsRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "An object that allows entries in this table to be created and
             deleted by management operation using the RowStatus convention."
    ::= { m3uaAsEntry 4 }

-- The Application Server Process Table
-- ************************************

-- The Application Server Process table contains information about each
-- ASP that is serving an specific AS trough a specific SCTP Association.

-- This table exists when the Proccess Type is SGP or IPSP.

-- Although an ASP is identified with an unique SCTP endpoint, there may
-- be more than one ASP table entry indexed by the same SCTP Association Id.
-- The reason for this is that an ASP may maintain different states for 
-- the different ASs that it is serving. An ASP entry will then exist in the
-- table per every combination of m3uaAspAssocId and m3uaAsId.

-- When an ASP Active message is sent from the remote ASP Endpoint including
-- the Routing Contexts that identify the ASs that the ASP is serving, one
-- entry is created in this table per every RC received with the message.

-- Entries in this table cannot be added, deleted or modified via 
-- management.

m3uaAspTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF M3uaAspEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A table containing Application Server Process-specific 
            information."
    ::= { m3uaTables 2 }

m3uaAspEntry OBJECT-TYPE
    SYNTAX      M3uaAspEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "General common variables for the ASP."
    INDEX   { m3uaAsId,       -- shared index
              m3uaAspAssocId }
    ::= { m3uaAspTable 1 }

M3uaAspEntry ::= SEQUENCE {
	m3uaAspAssocId				Unsigned32,
	m3uaAspState				INTEGER
    }

m3uaAspAssocId OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Association Identification. Value identifying the association 
	     of the endpoint corresponding to the ASP. This value is extracted
             from the SCTP association through which the ASP Active message has
             been received."
    ::= { m3uaAspEntry 1 }

m3uaAspState OBJECT-TYPE
    SYNTAX      INTEGER {
                    active(1),
                    standby(2),
                    inactive(3),
                    down(4)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Current Application Server Process State. Based on
            ASPM Messages."
    ::= { m3uaAspEntry 2 }

-- The Signaling Gateway Table
-- ****************************

-- The Signaling Gateway table contains information about each
-- Signaling Gateway for which one or more routing keys can exist in the 
-- routing table.

-- This table exists when the Proccess Type is ASP.

m3uaSgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF M3uaSgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A table containing Signaling Gateway-specific information."
    ::= { m3uaTables 3 }

m3uaSgEntry OBJECT-TYPE
    SYNTAX      M3uaSgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "General common variables for the SG."
    INDEX   { m3uaSgId }
    ::= { m3uaSgTable 1 }

M3uaSgEntry ::= SEQUENCE {
	m3uaSgId				Unsigned32,
	m3uaSgState				INTEGER,
	m3uaSgTrafficMode			INTEGER,
	m3uaSgRowStatus				RowStatus
    }

m3uaSgId OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Signaling Gateway Identification Value. Assigned by 
            management."
    ::= { m3uaSgEntry 1 }

m3uaSgState OBJECT-TYPE
    SYNTAX      INTEGER {
                    active(1),
                    down(2),
                    pending(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Current Signaling Gateway State. Based on the state
            of the SGPs which serve it."
    ::= { m3uaSgEntry 2 }

m3uaSgTrafficMode OBJECT-TYPE
    SYNTAX      INTEGER {
                    loadshare(1),
                    override(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Current Signaling Gateway traffic handling mode."
    ::= { m3uaSgEntry 3 }

m3uaSgRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "An object that allows entries in this table to be created and
             deleted by management operation using the RowStatus convention."
    ::= { m3uaSgEntry 4 }

-- The Signaling Gateway Process Table
-- ***********************************

-- The Signaling Gateway Process table contains information about each
-- SGP that is serving an specific SG trough a specific SCTP Association.
-- A SGP is identified with an unique SCTP endpoint.

-- This table exists when the Proccess Type is ASP.

m3uaSgpTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF M3uaSgpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A table containing Signaling Gateway Process-specific 
            information."
    ::= { m3uaTables 4 }

m3uaSgpEntry OBJECT-TYPE
    SYNTAX      M3uaSgpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "General common variables for the ASP."
    INDEX   { m3uaSgId,       -- shared index
              m3uaSgpAssocId }
    ::= { m3uaSgpTable 1 }

M3uaSgpEntry ::= SEQUENCE {
	m3uaSgpState				INTEGER,
	m3uaSgpAssocId				Unsigned32,
	m3uaSgpRowStatus			RowStatus
    }

m3uaSgpState OBJECT-TYPE
    SYNTAX      INTEGER {
                    active(1),
                    down(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Current Signaling Gateway Process State. Based on
            ASPM Messages."
    ::= { m3uaSgpEntry 1 }

m3uaSgpAssocId OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Association Identification. Value identifying the association 
	     to that endpoint. This value is extracted from the SCTP 
             association through which the ASP has connected the SGP."
    ::= { m3uaSgpEntry 2 }

m3uaSgpRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "An object that allows entries in this table to be created and
             deleted by management operation using the RowStatus convention."
    ::= { m3uaSgpEntry 3 }

-- The Routing Table
-- *****************

-- The Routing table contains a list of routing keys which translate to
-- Application Servers or Signaling Gateways.

-- This table exists with any Proccess Type.

-- An Index Computation mechanism could be considered instead of current
-- multi-index mechanism.

m3uaRoutingTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF M3uaRoutingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A table containing Routing-specific information."
    ::= { m3uaTables 5 }

m3uaRoutingEntry OBJECT-TYPE
    SYNTAX      M3uaRoutingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "General common variables for a Routing Key."
    INDEX   { m3uaNA,
              m3uaNI,
              m3uaSI,
              m3uaOPC,
              m3uaDPC,
              m3uaSSN,
              m3uaCICmin,
              m3uaCICmax }

    ::= { m3uaRoutingTable 1 }
 
M3uaRoutingEntry ::= SEQUENCE {
	m3uaNA			Unsigned32,	
	m3uaNI			Unsigned32,
	m3uaSI			Unsigned32,
	m3uaOPC			Unsigned32,
	m3uaDPC			Unsigned32,
	m3uaSSN			Unsigned32,
	m3uaCICmin		Unsigned32,
	m3uaCICmax		Unsigned32,
	m3uaPeerAppId		Unsigned32,
        m3uaRoutingRowStatus	RowStatus
    }

m3uaNA OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Network Appearance for that routing key. A default value
            will be assigned if not present in the Routing Key."
    ::= { m3uaRoutingEntry 1 }

m3uaNI OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Network Indicator for that routing key. A default value
            will be assigned if not present in the Routing Key."
    ::= { m3uaRoutingEntry 2 }

m3uaSI OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Service Indicator for that routing key. A default value
            will be assigned if not present in the Routing Key."
    ::= { m3uaRoutingEntry 3 }

m3uaOPC OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Origination Point Code for that routing key. A default value
            will be assigned if not present in the Routing Key."
    ::= { m3uaRoutingEntry 4 }

m3uaDPC OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Destination Point Code for that routing key. A default value
            will be assigned if not present in the Routing Key."
    ::= { m3uaRoutingEntry 5 }

m3uaSSN OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Subsystem Number for that routing key. A default value
            will be assigned if not present in the Routing Key."
    ::= { m3uaRoutingEntry 6 }

m3uaCICmin OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Minumum value of the Circuit Identification Code 
            Range for that routing key. A default value will
            be assigned if not present in the Routing Key."
    ::= { m3uaRoutingEntry 7 }

m3uaCICmax OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Maximum value of the Circuit Identification Code 
            Range for that routing key. A default value will
            be assigned if not present in the Routing Key."
    ::= { m3uaRoutingEntry 8 }

m3uaPeerAppId OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Peer Application Identification Value. It can identify
            an Application Server or a Signaling Gateway."
    ::= { m3uaRoutingEntry 9 }

m3uaRoutingRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "An object that allows entries in this table to be created and
             deleted by management operation using the RowStatus convention."
    ::= { m3uaRoutingEntry 10 }

-- The Network Appearance table
-- ****************************

-- The NA table contains information about the specific variables
-- that apply to every Network Appearance.

-- This table can exists (not neccessarily) with any Proccess Type.

m3uaNaTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF M3uaNaEntry 
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A table containing Network Appearance-specific information."
    ::= { m3uaTables 6 }

m3uaNaEntry  OBJECT-TYPE
    SYNTAX      M3uaNaEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "General common variables for a Network Appearance."
    INDEX   { m3uaNA }	-- shared index

    ::= { m3uaNaTable  1 }
 
M3uaNaEntry  ::= SEQUENCE {
	m3uaNaNI				Unsigned32,
	m3uaNaMtp3ProtocolType			INTEGER,
	m3uaNaMtp3ProtocolVariant		Unsigned32,
	m3uaNaMtp3ProtocolVersion		Unsigned32,
        m3uaNaRowStatus				RowStatus
    }

m3uaNaNI OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Identifies the Network Indicator of the SG Node in the 
             SS7 Network."

    ::= { m3uaNaEntry  2 }

m3uaNaMtp3ProtocolType OBJECT-TYPE
    SYNTAX      INTEGER {
                    itu(1),
                    ansi(2),
                    china(3),
                    ntt(4),
                    other(5)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The MTP3 protocol type for this NA."

    ::= { m3uaNaEntry  4 }

m3uaNaMtp3ProtocolVariant OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The MTP3 protocol variant for this NA."

    ::= { m3uaNaEntry  5 }

m3uaNaMtp3ProtocolVersion OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The MTP3 protocol version for this NA."

    ::= { m3uaNaEntry  6 }

m3uaNaRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "An object that allows entries in this table to be created and
             deleted by management operation using the RowStatus convention."

    ::= { m3uaNaEntry  7 }

-- The Point Code table
-- ****************************

-- The PC table contains a list of point codes that identify the SG node
-- in the SS7 Network. This list is related with and extends information of
-- every NA in NA Table.

-- This table can exists (not neccessarily) with any Proccess Type.

m3uaNaPcTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF M3uaNaPcEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A table containing the list of Point Codes that identify 
             the SG Node in the SS7 Network for that Network App."

    ::= { m3uaTables 7 }

m3uaNaPcEntry OBJECT-TYPE
    SYNTAX      M3uaNaPcEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
		"Point Code Entry."
    INDEX   { m3uaNA,      -- shared index
              m3uaNaPC }
    ::= { m3uaNaPcTable 1 }

M3uaNaPcEntry  ::= SEQUENCE {
	m3uaNaPC				Unsigned32,
        m3uaNaPcRowStatus			RowStatus
    }

m3uaNaPC OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Point Code Value."

    ::= { m3uaNaPcEntry 1 }

m3uaNaPcRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "An object that allows entries in this table to be created and
             deleted by management operation using the RowStatus convention."

    ::= { m3uaNaPcEntry 2 }

-- The SP Endpoint Table
-- **********************

-- Defines data related to a Signaling Process Endpoint. 
-- A SP Endpoint identifies a peer node were a SGP, ASP or IPSP are running.

-- This table exists with any Proccess Type.

-- The table contains the Endpoint Identifier and data related to the 
-- SCTP association to that remote endpoint. 

-- The Signaling Process Endpoint table contains information about 
-- specific data regarding the physical location of that endpoint,
-- the list of remote IP addresses of that  endpoint, and the list of local 
-- IP addresses that want to be used against that endpoint.

-- The table contains data related to the Association, as its state, number of
-- streams, and the Association ID, provided by SCTP when the association is 
-- established.

-- The main table also contains statistics data related to the M3UA messaging
-- exchanged through that association between the Signaling Processes that
-- hold the association.

m3uaSpEpTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF M3uaSpEpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A table containing Signaling Process Endpoint-specific 
            information."
    ::= { m3uaTables 8 }

m3uaSpEpEntry OBJECT-TYPE
    SYNTAX      M3uaSpEpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "General common variables for the ASP."
    INDEX   { m3uaAsId,       -- shared index
              m3uaSpEpId }
    ::= { m3uaSpEpTable 1 }

M3uaSpEpEntry ::= SEQUENCE {
	m3uaSpEpId				Unsigned32,
	m3uaSpEpAssocId				Unsigned32,
	m3uaSpEpAssocRemHostName		OCTET STRING,
	m3uaSpEpAssocRemPort     		Unsigned32,
        m3uaSpEpAssocReqOutStreams		Unsigned32,
        m3uaSpEpAssocOutStreams			Unsigned32,
        m3uaSpEpAssocIncStreams			Unsigned32,
	m3uaSpEpAssocState			INTEGER,
        m3uaSpEpAssocDataSent			Counter64,
        m3uaSpEpAssocDataReceived		Counter64,
        m3uaSpEpAssocAspupSent			Counter64,
        m3uaSpEpAssocAspupAckSent		Counter64,
        m3uaSpEpAssocAspacSent			Counter64,
        m3uaSpEpAssocAspacAckSent		Counter64,
        m3uaSpEpAssocAspdnSent			Counter64,
        m3uaSpEpAssocAspdnAckSent		Counter64,
        m3uaSpEpAssocAspiaSent			Counter64,
        m3uaSpEpAssocAspiaAckSent		Counter64,
        m3uaSpEpAssocAspupReceived		Counter64,
        m3uaSpEpAssocAspupAckReceived		Counter64,
        m3uaSpEpAssocAspacReceived		Counter64,
        m3uaSpEpAssocAspacAckReceived		Counter64,
        m3uaSpEpAssocAspdnReceived		Counter64,
        m3uaSpEpAssocAspdnAckReceived		Counter64,
        m3uaSpEpAssocAspiaReceived		Counter64,
        m3uaSpEpAssocAspiaAckReceived		Counter64,
        m3uaSpEpAssocNotifySent			Counter64,
        m3uaSpEpAssocErrorSent			Counter64,
        m3uaSpEpAssocNotifyReceived		Counter64,
        m3uaSpEpAssocErrorReceived		Counter64,
        m3uaSpEpAssocDunaSent			Counter64,
        m3uaSpEpAssocDavaSent			Counter64,
        m3uaSpEpAssocSconSent			Counter64,
        m3uaSpEpAssocDupuSent			Counter64,
        m3uaSpEpAssocDaudSent			Counter64,
        m3uaSpEpAssocDunaReceived		Counter64,
        m3uaSpEpAssocDavaReceived		Counter64,
        m3uaSpEpAssocSconReceived		Counter64,
        m3uaSpEpAssocDupuReceived		Counter64,
        m3uaSpEpAssocDaudReceived		Counter64,
	m3uaSpEpRowStatus			RowStatus
    }

m3uaSpEpId OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Signaling Process Endpoint Identification Value."
    ::= { m3uaSpEpEntry 1 }

m3uaSpEpAssocId OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Association Identification. Value identifying the association 
	     for that endpoint. This value is extracted from the SCTP 
             association Id value returned by SCTP when the association is
             established to that endpoint."
    ::= { m3uaSpEpEntry 2 }

m3uaSpEpAssocRemHostName OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..255))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "Peer's DNS name. 
	     If no DNS domain name was received at init time from the peer, 
	     this entry will be meaningless, therefore it will store a NULL 
	     value. 
	     Otherwise, the remote host name received at init time will be 
	     stored."
    ::= { m3uaSpEpEntry 3 }

m3uaSpEpAssocRemPort OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "M3UA port number to connect to remote Endpoint."
    ::= { m3uaSpEpEntry 4 }

m3uaSpEpAssocReqOutStreams OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "If the SCTP association is initiated from the local peer,
            this will be the number of outgoing streams that will be 
            requested to the remote peer at association start up."

    ::= { m3uaSpEpEntry 5 }

m3uaSpEpAssocOutStreams OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "outgoing Streams according to the negotiation at association
             start up. This parameter has to be read-only by the manager."

    ::= { m3uaSpEpEntry 6 }

m3uaSpEpAssocIncStreams OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Incoming Streams according to the negotiation at association
             start up. This parameter has to be read-only by the manager."

    ::= { m3uaSpEpEntry 7 }

m3uaSpEpAssocState OBJECT-TYPE
    SYNTAX      INTEGER {
                    closed(1),
                    established(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The state of this SCTP association."
    ::= { m3uaSpEpEntry 8 }

-- Association Statistics

-- DATA Statistics per Association

m3uaSpEpAssocDataSent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of DATA messages sent through the association."
    ::= { m3uaSpEpEntry 9 }

m3uaSpEpAssocDataReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of DATA messages received through the association."
    ::= { m3uaSpEpEntry 10 }

-- End of DATA Statistics per Association

-- MGMT Statistics per Association

m3uaSpEpAssocAspupSent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPUP messages sent through the association."
    ::= { m3uaSpEpEntry 11 }

m3uaSpEpAssocAspupAckSent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPUP ACK messages sent through the association."
    ::= { m3uaSpEpEntry 12 }

m3uaSpEpAssocAspacSent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPAC messages sent through the association."
    ::= { m3uaSpEpEntry 13 }

m3uaSpEpAssocAspacAckSent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPAC ACK messages sent through the association."
    ::= { m3uaSpEpEntry 14 }

m3uaSpEpAssocAspdnSent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPDN messages sent through the association."
    ::= { m3uaSpEpEntry 15 }

m3uaSpEpAssocAspdnAckSent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPDN ACK messages sent through the association."
    ::= { m3uaSpEpEntry 16 }

m3uaSpEpAssocAspiaSent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPIA messages sent through the association."
    ::= { m3uaSpEpEntry 17 }

m3uaSpEpAssocAspiaAckSent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPIA ACK messages sent through the association."
    ::= { m3uaSpEpEntry 18 }

m3uaSpEpAssocAspupReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPUP messages received through the association."
    ::= { m3uaSpEpEntry 19 }

m3uaSpEpAssocAspupAckReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPUP ACK messages received through the association."
    ::= { m3uaSpEpEntry 20 }

m3uaSpEpAssocAspacReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPAC messages received through the association."
    ::= { m3uaSpEpEntry 21 }

m3uaSpEpAssocAspacAckReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPAC ACK messages received through the association."
    ::= { m3uaSpEpEntry 22 }

m3uaSpEpAssocAspdnReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPDN messages received through the association."
    ::= { m3uaSpEpEntry 23 }

m3uaSpEpAssocAspdnAckReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPDN ACK messages received through the association."
    ::= { m3uaSpEpEntry 24 }

m3uaSpEpAssocAspiaReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPIA messages received through the association."
    ::= { m3uaSpEpEntry 25 }

m3uaSpEpAssocAspiaAckReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ASPIA ACK messages received through the association."
    ::= { m3uaSpEpEntry 26 }

-- End of ASPM Statistics per Association

-- MGMT Statistics per Association

m3uaSpEpAssocNotifySent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of NOTIFY messages sent through the association."
    ::= { m3uaSpEpEntry 27 }

m3uaSpEpAssocErrorSent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ERROR messages sent through the association."
    ::= { m3uaSpEpEntry 28 }

m3uaSpEpAssocNotifyReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of NOTIFY messages Received through the association."
    ::= { m3uaSpEpEntry 29 }

m3uaSpEpAssocErrorReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of ERROR messages Received through the association."
    ::= { m3uaSpEpEntry 30 }

-- End of MGMT Statistics per Association

-- SSNM Statistics per Association

m3uaSpEpAssocDunaSent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of DUNA messages sent through the association."
    ::= { m3uaSpEpEntry 31 }

m3uaSpEpAssocDavaSent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of DAVA messages sent through the association."
    ::= { m3uaSpEpEntry 32 }

m3uaSpEpAssocSconSent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of SCON messages sent through the association."
    ::= { m3uaSpEpEntry 33 }

m3uaSpEpAssocDupuSent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of DUPU messages sent through the association."
    ::= { m3uaSpEpEntry 34 }

m3uaSpEpAssocDaudSent OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of DAUD messages sent through the association."
    ::= { m3uaSpEpEntry 35 }

m3uaSpEpAssocDunaReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of DUNA messages received through the association."
    ::= { m3uaSpEpEntry 36 }

m3uaSpEpAssocDavaReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of DAVA messages received through the association."
    ::= { m3uaSpEpEntry 37 }

m3uaSpEpAssocSconReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of SCON messages received through the association."
    ::= { m3uaSpEpEntry 38 }

m3uaSpEpAssocDupuReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of DUPU messages received through the association."
    ::= { m3uaSpEpEntry 39 }

m3uaSpEpAssocDaudReceived OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Number of DAUD messages received through the association."
    ::= { m3uaSpEpEntry 40 }

-- End of SSNM Statistics per Association

m3uaSpEpRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "An object that allows entries in this table to be created and
             deleted by management operation using the RowStatus convention."
    ::= { m3uaSpEpEntry 41 }

-- Expanded tables: Including Multihome feature 

-- Local Address table
-- *******************

-- This table exists with any Proccess Type.

m3uaAssocLocalAddressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SctpAssocLocalAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "Expanded table of m3uaAssocTable based on the AssocId index.
             It shows several interesting data for each local  
             address which takes part in this association."
    ::= { m3uaTables 9 }

m3uaAssocLocalAddressEntry OBJECT-TYPE
    SYNTAX      SctpAssocLocalAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "Local information about the available addresses."
    INDEX   { m3uaSpEpAssocId,	-- shared index
	      m3uaAssocLocalAddressIPType,
	      m3uaAssocLocalAddressIP }
    ::= { m3uaAssocLocalAddressTable 1 }

SctpAssocLocalAddressEntry ::= SEQUENCE {
	m3uaAssocLocalAddressIPType	InetAddressType,
	m3uaAssocLocalAddressIP		InetAddress,
	m3uaAssocLocalAddressRowStatus	RowStatus	
        }

m3uaAssocLocalAddressIPType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The type of a local IP address available for this association.
	     unknown (0) An unknown address type. This value MUST 
	     		 be used if the value of the corresponding 
			 InetAddress object is a zero-length string. 
			 It may also be used to indicate an IP address 
			 which is not one of the formats defined below.
 			 This value is used in this MIB for error conditions.

 	     ipv4 (1)    An IPv4 address as defined by the InetAddressIPv4 
	     		 textual convention [RFC2851]. 

 	     ipv6 (2)    An IPv6 address as defined by the InetAddressIPv6 
	     		 textual convention [RFC2851]."

    ::= { m3uaAssocLocalAddressEntry 1 }

m3uaAssocLocalAddressIP OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The value of a local IP address available for this association.
	     An InetAddress value is always interpreted within the 
	     context of an InetAddressType value.
	     If SCTP are using DNS names, the mapping to IP address/-es
	     will be done at reception of INIT or INIT_ACK messages."
    ::= { m3uaAssocLocalAddressEntry 2 }

m3uaAssocLocalAddressRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "An object that allows entries in this table to be created and
             deleted using the RowStatus convention.
	     A row in this table will be created per local IP address to be 
             used in this association. The creation takes part when
             a new row in the m3uaAssocTable is created or when a new IP 
	     address is added in the local interface (if this function 
	     is allowed). 
	     A row in this table will be deleted per local IP address used 
             in this association when the corresponding row in m3uaAssocTable 
	     is deleted or when an IP address is removed from the local
	     interface (if this function is allowed).."
    ::= { m3uaAssocLocalAddressEntry 3 }

-- Remote Addresses TABLE
-- **********************

-- This table exists with any Proccess Type.

m3uaAssocRemAddressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SctpAssocRemAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "Expanded table of m3uaAssocTable based on the AssocId index
             It shows several interesting data for each remote peer IP
             address which is used in this association."
    ::= { m3uaTables 10 }

m3uaAssocRemAddressEntry OBJECT-TYPE
    SYNTAX      SctpAssocRemAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "Information about the remote IP address most important variables"
    INDEX   { m3uaSpEpAssocId,	-- shared index
              m3uaAssocRemAddressIPType,
              m3uaAssocRemAddressIP }
    ::= { m3uaAssocRemAddressTable 1 }

SctpAssocRemAddressEntry ::= SEQUENCE {
	m3uaAssocRemAddressIPType		InetAddressType,
	m3uaAssocRemAddressIP			InetAddress,
	m3uaAssocRemAddressRowStatus		RowStatus	
	}

m3uaAssocRemAddressIPType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The type of a remote IP address available for this association.
	     unknown (0) An unknown address type. This value MUST 
	     		 be used if the value of the corresponding 
			 InetAddress object is a zero-length string. 
			 It may also be used to indicate an IP address 
			 which is not one of the formats defined below.
 			 This value is used in this MIB for error conditions.

 	     ipv4 (1)    An IPv4 address as defined by the InetAddressIPv4 
	     		 textual convention [RFC2851]. 

 	     ipv6 (2)    An IPv6 address as defined by the InetAddressIPv6 
	     		 textual convention [RFC2851]."
    ::= { m3uaAssocRemAddressEntry 1 }

m3uaAssocRemAddressIP OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The value of a remote IP address available for this association.
	     An InetAddress value is always interpreted within the 
	     context of an InetAddressType value."
    ::= { m3uaAssocRemAddressEntry 2 }

m3uaAssocRemAddressRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "An object that allows entries in this table to be created and
             deleted using the RowStatus convention.
	     A row in this table will be created per remote IP address to be 
             used in this association. The creation takes part when
             a new row in the m3uaAssocTable is created. 
	     A row in this table will be deleted per remote IP address used 
             in this association when the corresponding row in m3uaAssocTable 
	     is deleted."
    ::= { m3uaAssocRemAddressEntry 3 }

-- 4.1 Conformance Information

m3uaGroups      OBJECT IDENTIFIER ::= { m3uaConformance 1 }
m3uaCompliances OBJECT IDENTIFIER ::= { m3uaConformance 2 }

-- 4.1.1 Compliance Statements

m3uaCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for SNMPv2 entities which
            implement M3UA."
    MODULE  -- this module
        MANDATORY-GROUPS { m3uaGeneralVariablesGroup,
        	           m3uaAsTablesVariablesGroup,
        	           m3uaAspTablesVariablesGroup,
        	           m3uaSpEpTablesVariablesGroup,
        	           m3uaSgTablesVariablesGroup,
        	           m3uaSgpTablesVariablesGroup,
        	           m3uaRoutingTablesVariablesGroup,
        	           m3uaNaTablesVariablesGroup,
        	           m3uaPcTablesVariablesGroup,
        	           m3uaSpEpVariablesGroup,
                           m3uaLocAddrTablesVariablesGroup,
                           m3uaRemAddrTablesVariablesGroup
                         }   

    GROUP m3uaStateStatGroup
    DESCRIPTION
         "The m3ua group of objects to control state changes in the M3UA
          protocol."

    OBJECT  m3uaAssocLocalAddressIPType
    SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
    DESCRIPTION
         "It is only required to have IPv4 and IPv6 addresses to be 
          stored since the use of the host names is limited to first 
          stage, when the association is being established."

    OBJECT  m3uaAssocLocalAddressIP
    SYNTAX  InetAddress (SIZE(4|16))
    DESCRIPTION
         "It is only required to support IPv4 and unique IPv6
          addresses."

    OBJECT  m3uaAssocRemAddressIPType
    SYNTAX  InetAddressType { ipv4(1), ipv6(2) }
    DESCRIPTION
         "It is only required to have IPv4 and IPv6 addresses to be 
          stored since the use of the host names is limited to first 
          stage, when the association is being established."

    OBJECT  m3uaAssocRemAddressIP
    SYNTAX  InetAddress (SIZE(4|16))
    DESCRIPTION
         "It is only required to support IPv4 and unique IPv6
          addresses."
            
    ::= { m3uaCompliances 1 }

-- 4.1.2 Units of conformance

    m3uaGeneralVariablesGroup OBJECT-GROUP
    OBJECTS   { m3uaProcType, m3uaLocalPort, m3uaTrValue, m3uaTBeatValue, 
	m3uaTAckValue, m3uaTPaudValue, m3uaSpLshMethod, m3uaStreamLshMethod, 
        m3uaMaxStreamInbound, m3uaFailOverBuffering, m3uaFailOverBuffSize,
        m3uaMaxPeerApplications, m3uaMaxSPperApplications, m3uaHeartBeat, 
        m3uaVersion
	}
    STATUS    current
    DESCRIPTION
            "The m3ua group of objects providing for management of M3UA
            entities. Common parameters for the protocol."
    ::= { m3uaGroups 1 }
    

    m3uaStateStatGroup OBJECT-GROUP
    OBJECTS   { m3uaRoutingFailures
	      }
    STATUS    current
    DESCRIPTION
            "The m3ua group of objects to control state changes in the M3UA
            protocol."
    ::= { m3uaGroups 2 }

    m3uaAsTablesVariablesGroup OBJECT-GROUP
    OBJECTS   { m3uaAsId, m3uaAsState, m3uaAsTrafficMode, 
	        m3uaAsRowStatus
	}
    STATUS    current
    DESCRIPTION
            "The m3ua group of objects to manage ASs."
    ::= { m3uaGroups 3 }

    m3uaAspTablesVariablesGroup OBJECT-GROUP
    OBJECTS   { m3uaAspAssocId,
                m3uaAspState
	}
    STATUS    current
    DESCRIPTION
            "The m3ua group of objects to manage ASPs."
    ::= { m3uaGroups 4 }

    m3uaSpEpTablesVariablesGroup OBJECT-GROUP
    OBJECTS   { m3uaSpEpId, m3uaSpEpAssocId, 
                m3uaSpEpRowStatus
	}
    STATUS    current
    DESCRIPTION
            "The m3ua group of objects to manage SP Endpoints."
    ::= { m3uaGroups 5 }

    m3uaSgTablesVariablesGroup OBJECT-GROUP
    OBJECTS   { m3uaSgId, m3uaSgState, m3uaSgTrafficMode,
                m3uaSgRowStatus
	}
    STATUS    current
    DESCRIPTION
            "The m3ua group of objects to manage SGs."
    ::= { m3uaGroups 6 }

    m3uaSgpTablesVariablesGroup OBJECT-GROUP
    OBJECTS   { m3uaSgpState, m3uaSgpAssocId,
                m3uaSgpRowStatus
	}
    STATUS    current
    DESCRIPTION
            "The m3ua group of objects to manage SGPs."
    ::= { m3uaGroups 7 }

    m3uaRoutingTablesVariablesGroup OBJECT-GROUP
    OBJECTS   { m3uaNA, m3uaNI, m3uaSI, m3uaOPC,
                m3uaDPC, m3uaSSN, m3uaCICmin,
                m3uaCICmax, m3uaPeerAppId, m3uaRoutingRowStatus
	}
    STATUS    current
    DESCRIPTION
            "The m3ua group of objects to manage Routing Tables."
    ::= { m3uaGroups 8 }

    m3uaNaTablesVariablesGroup OBJECT-GROUP
    OBJECTS   { m3uaNA, m3uaNaNI, m3uaNaMtp3ProtocolType,
                m3uaNaMtp3ProtocolVariant, m3uaNaMtp3ProtocolVersion,
                m3uaNaRowStatus
	}
    STATUS    current
    DESCRIPTION
            "The m3ua group of objects to manage NA Tables."
    ::= { m3uaGroups 9 }

    m3uaPcTablesVariablesGroup OBJECT-GROUP
    OBJECTS   { m3uaNaPC,
                m3uaNaPcRowStatus
	}
    STATUS    current
    DESCRIPTION
            "The m3ua group of objects to manage PC Tables."
    ::= { m3uaGroups 10 }

    m3uaSpEpVariablesGroup OBJECT-GROUP
    OBJECTS   { m3uaSpEpAssocId, m3uaSpEpAssocState, m3uaSpEpAssocRemPort, 
		m3uaSpEpAssocReqOutStreams, m3uaSpEpAssocOutStreams,
                m3uaSpEpAssocIncStreams, m3uaSpEpAssocRemHostName,
                m3uaSpEpAssocDataSent, m3uaSpEpAssocDataReceived,
                m3uaSpEpAssocAspupSent, m3uaSpEpAssocAspupAckSent,
                m3uaSpEpAssocAspacSent, m3uaSpEpAssocAspacAckSent,
                m3uaSpEpAssocAspdnSent, m3uaSpEpAssocAspdnAckSent,
                m3uaSpEpAssocAspiaSent, m3uaSpEpAssocAspiaAckSent,
                m3uaSpEpAssocAspupReceived, m3uaSpEpAssocAspupAckReceived,
                m3uaSpEpAssocAspacReceived, m3uaSpEpAssocAspacAckReceived,
                m3uaSpEpAssocAspdnReceived, m3uaSpEpAssocAspdnAckReceived,
                m3uaSpEpAssocAspiaReceived, m3uaSpEpAssocAspiaAckReceived,
                m3uaSpEpAssocNotifySent, m3uaSpEpAssocErrorSent,
                m3uaSpEpAssocNotifyReceived, m3uaSpEpAssocErrorReceived,
                m3uaSpEpAssocDunaSent, m3uaSpEpAssocDavaSent,
                m3uaSpEpAssocSconSent, m3uaSpEpAssocDupuSent,
                m3uaSpEpAssocDaudSent, m3uaSpEpAssocDunaReceived,
                m3uaSpEpAssocDavaReceived, m3uaSpEpAssocSconReceived,
                m3uaSpEpAssocDupuReceived, m3uaSpEpAssocDaudReceived,
                m3uaSpEpRowStatus
	}
    STATUS    current
    DESCRIPTION
            "The m3ua group of objects to manage Assoc. Tables."
    ::= { m3uaGroups 11 }

    m3uaLocAddrTablesVariablesGroup OBJECT-GROUP
    OBJECTS   { m3uaAssocLocalAddressIPType, m3uaAssocLocalAddressIP,
                m3uaAssocLocalAddressRowStatus
	}
    STATUS    current
    DESCRIPTION
            "The m3ua group of objects to manage Local IP Address Tables."
    ::= { m3uaGroups 12 }

    m3uaRemAddrTablesVariablesGroup OBJECT-GROUP
    OBJECTS   { m3uaAssocRemAddressIPType, m3uaAssocRemAddressIP,
                m3uaAssocRemAddressRowStatus
	}
    STATUS    current
    DESCRIPTION
            "The m3ua group of objects to manage Remote IP Address Tables."
    ::= { m3uaGroups 13 }

END

5.  References

[M3UA]      G. Sidebottom, L. Ong, Guy Mousseau, K. Gradischnig, H. J. 
	    Schwarzbauer, K. Morneault, I. Rytina, M. Kalla, N. Glaude, 
	    "SS7 MTP3-User Adaptation Layer (M3UA)",  
	    Internet Draft <draft-ietf-sigtran-m3ua-04.txt>, 
	    September 2000.

[MIBMPLS]   Cucchiara et al. "Definnitions of Managed Objects for the
	    Multiprotocol Label Switching, Label Distribution Protocol 
	    (LDP)", Internet Draf <draft-ietf-mpls-ldp-mib-04.txt>, 
	    January 2000. 

[SecSNMP]   Stallings, W., "SNMP3: A Security Enhancement for SNMP", 
	    IEEE Communication Surveys, Forth quarter 1998, Vol. 1 
  	    No. 1.

[Cong]      Jacobson, V., "Congestion Avoidance and Control", SIGCOMM 
	    1988, Stanford, California.

		
[RFC2571]   Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture
            for Describing SNMP Management Frameworks", RFC 2571, April
            1999.

[RFC1212]   Rose, M., and K. McCloghrie, "Concise MIB Definitions", STD
            16, RFC 1212, March 1991.

[RFC1215]   M. Rose, "A Convention for Defining Traps for use with the
            SNMP", RFC 1215, March 1991.

[RFC2578]   McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
            Rose, M., and S. Waldbusser, "Structure of Management
            Information Version 2 (SMIv2)", STD 58, RFC 2578, April
            1999.

[RFC2579]   McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
            Rose, M., and S. Waldbusser, "Textual Conventions for
            SMIv2", STD 58, RFC 2579, April 1999.

[RFC2580]   McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
            Rose, M., and S. Waldbusser, "Conformance Statements for
            SMIv2", STD 58, RFC 2580, April 1999.

[RFC1157]   Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple
            Network Management Protocol", STD 15, RFC 1157, May 1990.

[RFC1901]   Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
            "Introduction to Community-based SNMPv2", RFC 1901, January
            1996.

[RFC1906]   Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
            "Transport Mappings for Version 2 of the Simple Network
            Management Protocol (SNMPv2)", RFC 1906, January 1996.

[RFC2572]   Case, J., Harrington D., Presuhn R., and B. Wijnen, "Message
            Processing and Dispatching for the Simple Network Management
            Protocol (SNMP)", RFC 2572, April 1999.

[RFC2574]   Blumenthal, U., and B. Wijnen, "User-based Security Model
            (USM) for version 3 of the Simple Network Management
            Protocol (SNMPv3)", RFC 2574, April 1999.

[RFC1905]   Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
            "Protocol Operations for Version 2 of the Simple Network
            Management Protocol (SNMPv2)", RFC 1905, January 1996.

[RFC2573]   Levi, D., Meyer, P., and B. Stewart, "SNMPv3 Applications",
            RFC 2573, April 1999.

[RFC2575]   Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based
            Access Control Model (VACM) for the Simple Network
            Management Protocol (SNMP)", RFC 2575, April 1999.

[RFC2570]   Case, J., Mundy, R., Partain, D., and B. Stewart,
            "Introduction to Version 3 of the Internet-standard Network
            Management Framework", RFC 2570, April 1999.

[RFC2851]   Textual Conventions for Internet Network Addresses ,
     	    RFC 2851, June 2000. 

[RFC2119]   Bradner, S., "Key words for use in RFCs to Indicate Requirement
     	    Levels", BCP 14, RFC 2119, Harvard University, March 1997
    
6. Security Consideration

There are a number of management objects defined in this MIB that have 
a MAX-ACCESS clause of read-write and/or read-create.  Such objects may 
be considered sensitive or vulnerable in some network environments. The 
support for SET operations in a non-secure environment without proper 
protection can have a negative effect on network operations.

It is thus important to control even GET access to these objects and 
possibly to even encrypt the values of these object when sending them 
over the network via SNMP.  Not all versions of SNMP provide features 
for such a secure environment.

SNMPv1 by itself is not a secure environment.  Even if security measures 
are taken (e.g., using IPSEC), there is no per-user control as to who 
(once an IPSEC association is established between hosts) is allowed to 
GET or SET the objects in this MIB

It is recommended that the implementers consider the security features 
as provided by the SNMPv3 framework.  Specifically, the use of the 
User-based Security Model RFC 2574 [RFC2574] and the View-based Access 
Control Model RFC 2575 [RFC2575] is recommended.

It is then a customer/user responsibility to ensure that the SNMP entity 
giving access to an instance of this MIB, is properly configured to give 
access to the objects only to those principals (users) that have 
legitimate rights to indeed GET or SET (change/create/delete) them.

7. Acknowledgments

The author wish to thank Shyamal Prasad, Kurt Kite and Jennifer Jones for 
their comments.

8. Authors' Addresses

Antonio Roque                             Tel: +34-91-339-3523
Ericsson Espana S.A.                      EMail: Antonio.Roque@ericsson.com
Network Communication Services
Retama 7, 5th floor		   
Madrid, 28045	   
Spain				   

9. Revision History

Changes from pre-draft rev 00 to sigtran-draft rev 00:

- Timer TRtmsn renamed as TAck.
- Added a new object to enable or disable heartbeat.
- New stream inbound/outbound objects added in general variables.
- Timer TPaud ( Periodic audit timer ) added to general variables.
- Counter32 replaced for Counter64 in RoutingFailures object type.
- State "PENDING" added to m3uaAsState object.
- Traffic handling mode removed from ASP table.
- Comments Text in NA Table modified: NA is relevant for ASP, IPSP and SGP.
- Editorial changes.


OpenSS7
SS7 for the
Common Man
Home TopIndex FirstPrev Next LastMore Download Info FAQ Mail  Home -> Documentation -> SIGTRAN -> draft-sigtran-m3ua-mib-00
Last modified: Wed, 07 Jan 2009 07:35:40 GMT
© Copyright 1997-2007 OpenSS7 Corporation All Rights Reserved.